Pedal Power 2+ users...

[Hector_G]

Do you use a daisy chain cable to power multiple pedals from one port?

If you do, which one is it?

I've been looking all over for an answer but can't find it.
I have at least 3 pedals that I can power off of one port, but can't find a daisy chain that'll work. I don't want to buy one off the internet only to get it and find it won't fit.

I've found daisy chains from 1SPOT and Godlyke, but I'm not sure if they're compatible with the ports from the Voodoo Labs Pedal Power.

 

[cheapbasslovin]

Yup.
Daisy chains like the onespot and godlyke will both work perfectly.

 

[TheMutt]

You can use the 1-Spot or Godlyke cables off of the existing cable of your PP2+, or get BOSS daisy chain cbles and plug them in direct to the PP2+'s jacks.

 

[bongomania]

It will only work well if the pedals you connect to the daisy chain have low current draw, like most overdrives/distortions/fuzzes.

 

[Unrepresented]

Yes, it will work. Make sure of course that the power supply needs of each of the pedals will be the same in terms of polarity, volts, and neg/pos powering. Once those all match up, you can daisy chain together if the total mA draw is within the limits of each output.

 

[asherthemachine]

this sounds exactly like the question i posed less than 2 months ago.. sssseeeaaarrrccccchhhhh