I'm guessing custom lengths and small plugs, that's why I got George L's at least.
Finally got the mighty mini all wired up and ready for jamming this weekend.
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Pedaltrain MINIs unite!
- Thread starter mrsquishy
- Start date
- Status
I'm guessing custom lengths and small plugs, that's why I got George L's at least.
Finally got the mighty mini all wired up and ready for jamming this weekend.
just had a thought. doesnt the sideways tuner annoy you? reckon its possible to mod it by flipping the screen? never done it. just a thought...
I'm guessing custom lengths and small plugs, that's why I got George L's at least.
Finally got the mighty mini all wired up and ready for jamming this weekend.
Dig this board! Muff is sticking out!
my finished pt mini (DIY version) will have: korg pitchblack, mxr bod, EHX BBM, 3leaf Grrrrrooooove Regulator & and a humble VT bass.
Is the space between the rails on the Mini the same as the space between the rails of the JR? I want to plan out for a Mini setup and use the JR's spaces as reference.
If not, how big is the space between the rails exactly?
If not, how big is the space between the rails exactly?
- Nov 24, 2008
- 5,687
- 19,487
- 41
- Disclosures
- DroppingAcidPedalEtching.com
Technically this isn't a PT MINI. It's homemade with dimensions of 19"x5"X2"
im doing a similar build to that, im gonna post it hear, lol
Well, if the other pedal board thread has to look at my board...so do you guys! I love my mini!
I can finally join this discussion!
I moved down from this board to a mini:
Here's how my current setup for my mini looks:
The signal goes:
EBMM SR5
Compulator
Tuner
VT Bass
DS-1 (modded for bass, soon to be replaced with my B:Assmaster once it has been rehoused in a smaller enclosure)
CS-9
RV-7
(not pictured) Ernie Ball VPJr (25k active)
Markbass LM-II
I moved down from this board to a mini:
Here's how my current setup for my mini looks:
The signal goes:
EBMM SR5
Compulator
Tuner
VT Bass
DS-1 (modded for bass, soon to be replaced with my B:Assmaster once it has been rehoused in a smaller enclosure)
CS-9
RV-7
(not pictured) Ernie Ball VPJr (25k active)
Markbass LM-II
Eric!
Commercial User
Who's doing the rehousing?
And I'm glad to see I'm not the only one to do the sideways-mounting like the Compulator and ST-200 (ironically, the same combo I have)
And I'm glad to see I'm not the only one to do the sideways-mounting like the Compulator and ST-200 (ironically, the same combo I have)
It's also a GIGANTIC weight reduction! The PT-Pro, when fully loaded, with the extra cables and the hard rolling case weighed somewhere in the vicinity of 100lbs. The Mini, with the EBVPJr and a 1Spot to power everything in the zipper compartment weighs a little over 20lbs. 80% weight reduction means that my poor back isn't dying every time that I had to lug the PT-Pro into or out of the trunk (on average, 4-6 times a week!
). The second reason is that I really didn't use all of the pedals that were sitting on the PT-Pro (many have already been sold). They just sat there for my amusement later when I was at home. I found that it simply wasn't worth it to lug everything around and continue to struggle with the super heavy board when it wasn't even getting used. 
Rest assured, that combo is anything but ironic....
The B:Assmaster is going to be rehoused by This1smyne. He's a pedal hobbyist from TheGearPage who is very well spoken of. I own a custom clone of the Super-Duper 2-in-1 (dual Super Hard-On boost) that he made, and was impressed with the build quality (it's a dead ringer compared to my guitarist friend's actual S-D 2-in-1). His page stated that he did rehousing, and so I was obligated to give it a look see. I'll definitely be making up a thread on this when everything is all sorted out. I might also send in the DOD FX32 to him to get it true-bypassed with a 3PDT, rehoused, and with a standard 9v jack stuck on there.
Glad I could help out...
...However...20 lbs? Reading that caused me to weigh my Mini; the bathroom scale says just under 8 lbs, but that's with no bag or EB (just how much does that thing weigh?) and one less box than yours.
Whoops! The scale needed to be calibrated.Glad I could help out...
However...20 lbs? Reading that caused me to weigh my Mini; the bathroom scale says just under 8 lbs, but that's with no bag or EB (just how much does that thing weigh?) and one less box than yours.
It's about 10lbs with everything loaded in the bag.
- Status
