Pedaltrain MINIs United Again!

[Dazonbass]

yet another iteration

Like this arrangement a lot, but can the thumpinator fit underneath the pedaltrain?

 

[Snakeman1066]

I'm assuming one of the pedals you're waiting for is a Source Audio?

If you can keep all those on there with cabling, I will bow down to you sir!

Yeah I'm also pretty curious how you're going to connect these without losing space. I will bow with him ^ .

 

[alainkills]

Like this arrangement a lot, but can the thumpinator fit underneath the pedaltrain?

no sir, the rubber feet underneath the pt mini is to small to cover the height of the thumpi..

 

[fivestringgecko]

Any chance a PP ISO will tuck underneath?

Correct me if I'm wrong but I don't think any of the current power bricks fit underneath without cutting the frame a bit and putting bigger feet on the bottom...

no sir, the rubber feet underneath the pt mini is to small to cover the height of the thumpi..

Correct... without modding, you're not going to fit much of anything underneath. With the feet that come stock, there's maybe 1/4"-1/2" inch between the bottom of the board and floor.

(I could actually measure, but I'm lazy this morning. lol)

5sg.

 

[BigBeatNut]

Correct... without modding, you're not going to fit much of anything underneath. With the feet that come stock, there's maybe 1/4"-1/2" inch between the bottom of the board and floor.

Not done this myself, but someone posted today on TGP (in the nano thread) that the Diago Powerstation fits underneath a nano (and presumably a mini too), if it's a power solution you're looking for.

 

[fivestringgecko]

Not done this myself, but someone posted today on TGP (in the nano thread) that the Diago Powerstation fits underneath a nano (and presumably a mini too), if it's a power solution you're looking for.

I'm actually pretty happy with my 1-spot, so no worries. Thanks though!

For anyone that IS looking, I've read a little bit about the new Pedaltrain Volto... not out yet, but looks pretty slim. MIGHT fit?

5sg.

 

[lburton2]

I made the fader-pedal for the expression out of the tremolessence and used a pedalriser to lift the mammoth clone (fat freak) high enough to keep my foot from messing with knobs.

Added some large feet to the board and used velcro to fasten the VooDoo Lab II.

 

[BigDBass]

For anyone that IS looking, I've read a little bit about the new Pedaltrain Volto... not out yet, but looks pretty slim. MIGHT fit?

I checked in with PedalTrain just this morning - The latest is that the Volto is delayed again and they're hoping for mid-July availability.

Added some large feet to the board and used velcro to fasten the VooDoo Lab II.

I've gone through 3 or maybe 4 sets of feet (for canes, walkers, furniture) from ebay, haven't found any that fit or work. Mind sharing what you're using or your source?

 

[phatbass30]

I checked in with PedalTrain just this morning - The latest is that the Volto is delayed again and they're hoping for mid-July availability.



I've gone through 3 or maybe 4 sets of feet (for canes, walkers, furniture) from ebay, haven't found any that fit or work. Mind sharing what you're using or your source?

Try this:

Invalid Link Removed

 

[BigDBass]

Try this:

Invalid Link Removed

Oh, thanks! That will do the trick. Tracked down a US dealer (pedalshark.com) and ordered.

 

[Valerus]

Here is my current pedalboard. I did a massive overhaul back in March/April, and I haven't had a chance to document it.

I got rid of my first pedal that I got back in 2007, my TU-2, for the smaller footprint of the Polytune Mini. So worth it.

I also switched out my beloved Pork Loin for the Darkglass Vintage Microtubes, partly because of space constraints, partly because the VM sounds so amazing.

I held onto my Phat Phuk B, Nimbus, and Carbon Copy.

I added a TC Electronic Ditto so that I can mess around with loops while I'm in my bedroom and doing some experimental jam sessions with my jam band.

I love this board, and it is safe to say that I will not be overhauling it ever again. It is a perfect size, perfect amount of pedal/board value, and it is so easy to setup and tear down.
The new board has made life even easier for me!

 

[chillerthanmost]

 

[mkandolf]

Where did you get those? (I see the link says Amazon but doesn't say what they are)

 

[BigDBass]

Where did you get those? (I see the link says Amazon but doesn't say what they are)

I use Hosa's low profile right-angle patch cables and I believe those are what is pictured.

Search your favorite shopping or auction site for Hosa IRG and you'll likely find them in various lengths and quantities.

 

[NOLA Bass]

I use Hosa's low profile right-angle patch cables and I believe those are what is pictured.

Search your favorite shopping or auction site for Hosa IRG and you'll likely find them in various lengths and quantities.

I use them too. I think I got mine off of EBay. They can be tricky to find, but work great imo.

 

[Valerus]

Where did you get those? (I see the link says Amazon but doesn't say what they are)

http://www.amazon.com/Hosa-IRG-600-5-Guitar-Cables-6-Inch/dp/B0002IAJ56/

there ya go!

 

[Stevorebob]

I use Lava Cable's Mini ELC with Lava-Switchcraft 229 pancake plugs. Same result as the Hosa IRG but better cable and custom lengths. More costly as well, but I think it's worth it.

http://www.lavacable.com/index.php?id=163

 

[mkandolf]

Thanks! Will start looking.

 

[sarsippius787]

 

[12SB]

Uploaded with ImageShack.us

newest incarnation!