Pedaltrain MINIs United Again!

[aledeville]

I'm pretty happy with the pitchblack.

 

[My name is Mudd]

It's hard to go wrong with something that says 'Korg.'

 

[Andy Brown]

Really ? The octave tracks OK ? I would love to have one if so, but the only report I heard so far on TB rated it pretty badly. -->

It's tracking is shaky for any notes below A, but I mainly use octave in the upper registers. It's serviceable, and good enough for my use.

 

[Andy Brown]

Awesome I just reposted that HERE, hope you don't mind

Not at all. Thanks.

 

[Betrushka102]

Here's my mini keepin it simple

 

[BassinCT]

The Vortex flanger is now in the mix: it plays nicely with the OD, it is smaller than the MXR, and it sounds great!

 

[freedomryder]

Think I'm done for now (minus one missing patch cable). Just picked up the Dispatch Master and the SS/BS Mini. Excited to test it all out in a band setting!

 

[FretNoMore]

The Dispatch Master has called my name over and over ... I may have to try it one day, looks like a great pedal. As is the ss/bs Mini, have that and like it a lot.

 

[My name is Mudd]

This year, I really hope to find a Dispatch Master (and a Grand Orbiter as well) to replacement my M5.

 

[maverick49]

Here is my latest "OCD" configuration. Looks like a TC Electronic advertisement. I dig the Minis and Tone Print. The only pedal that has remained for more than 6 months is the VT DI. I use it as a tone shaper/OD when the guitarists get a little unruly.

 

[Alv]

Thanks to Pedaltrain Mini and my mega sized power supply (12x8x5cm) for successfully suppressing the GAS

 

[ole Jason]

lol Just use a one-spot and velcro it underneath.

 

[kzr750r1]

Volto powered, JohnK Gamma and AE HSD ruling the roost.

 

[FretNoMore]

I assembled some pedals on a PT Mini today, for an upcoming gig where there will be minimal floor space. I had most of the pedals on my shelves but added a Joyo power supply a couple of weeks ago, and the MXR M81 Bass Preamp today.

The Joyo power supply is a bit too tall but just barely works with the raised feet on my Mini. To the left there is room for a G30 wireless receiver, though I won't have any room to run around so I'll leave that on my other board this time.

 

[PrettyWhore]

Finally got my hands on one of these! It's great.

Any suggestions for a fitting powersupply that (for the BC-1) does 18v or at least isolated 9v outputs that can be joined?

 

[Wootie]

Finally got my hands on one of these! It's great.

Any suggestions for a fitting powersupply that (for the BC-1) does 18v or at least isolated 9v outputs that can be joined?

Invalid Link Removed

 

[jmoorewright]

Here's mine at the moment. Spent way too much time trying to build something and finally just bought one...way better!

The cheap path cables need to be replaced eventually, but I had them around and they work fine. The CS-3 has to go, I don't like it at all for bass. I love the VT-Bass Deluxe, but it's huuuuge on this board, I'm the DI version instead. The Pitchblack has been great, but the switch is dying so needs to be swapped for something else, probably PolyTune mini.

 

[Callum_Carcass]

Updated pedalboard with a little shuffle and a new pedal, a Digitech JamMan Solo XT!

 

[NOLA Bass]

I keep updating. Currently, it has Boss TU-2 > EBS MultiComp > Plutonium Chi Wah Wah > Darkglass B7K > MXR Bass Envelope Filter.

 

[Embra]

Here's mine. Recently downsized my second board from a Junior to a Mini and loving it so far. I had to mod the board by adding a length of aluminium angle to the rear; I can now comfortably get more on without adding too much weight. Makes a nice change from carrying my big board around (PT2). Power is from a Cioks Adam fixed underneath. The BrightOnion dual looper will give way to an Xotic X-Blender sometime this week and eventually I'd like to swap the Love Squeeze for an FEA DE-CL. The Neunaber pedals arrived on Friday and so far I'm loving them, the EXP controller just adds a lot of flexibility (currently set as a delay, chorus, shimmer and reverb) and is very easy to set up and use.

View media item 2671
The angle fixed to the board before putting on the velcro.
View media item 2673