Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Post Your Pedalboard 26: Duotriskaidekaphobia
- Thread starter Eric!
- Start date
- Status
the last time me n doc went back to the past we left a little something behind, we left the camera also. your welcome. (in walks ehx's owner's cousin "hey electro, this is your cousin velcro harmonix, you know that fuzz sound you 'been lookin for..")
Thrown together in about an hour two Thursdays ago.
Since then I have upgraded to some George L's cables.
Also, I removed the datestamp from my Mom's camera
This setup has been awesome for the past week. A ton of versatility. The Bi-Fet Preamp is incredible on bass. I got mine NOS for pretty cheap!
Recording pedalboard update, this board has satisfied everything I need, probably going to swap out the Gig-fx Chopper Tremolo for a tap tempo pedal with a footswitch to more accurately approximate some dubstep lines.
Link Removed
Link Removed
I assume you are pushing the EQ into the MXR OD, then to the Pi or...?
If so - how does that help with the loss of lows in the MXR OD?
I picked up an that MXR OD and the loss of lows made me give it to my guitarded son
I was thinking of picking up a Bass-basedrolleyes
Actually, as it is set up the EQ is doing nothing except to a few bands around 1KHz.
The COD to my ear doesn't lose low end, it just has such a massive mid range that the lows get swallowed up. I like it.
I (hope) his is modded, otherwise, epic fail
OH NO THEY ARE ON TO ME!
That camera just cam back from being serviced when the pics were taken.
The Muff's in/out are reversed, done by previous owner (not Ben Franklin.)
...that's my story...
what is the point of reversing the ins and outs? Does this add mojo to a pedal? Should i try to use any of my pedals backwards, maybe they'll sound better?
The previous owner of the muff may have needed to reverse the inputs to make it easier to wire up on their pedalboard.
DerHoggz, is that a 1Spot daisy chain you're using there? It looks like there is something covering each 9v plug that isn't being used, is there? What are those? Are they Christmas light bulbs?
After many trips back and forth the bag for my Furman board finally went. I contacted them - and no answer. I contacted them again in hopes of replacing the bag - but no answer. Found a $40. roadie case on eBay that was the right size and mounted it in the lid. With this going on it gave me a chance to rewire it. Got a case big enough to carry extra cables.
- Nov 24, 2008
- 5,687
- 19,487
- 41
- Disclosures
- DroppingAcidPedalEtching.com
I was the dude who sold DerHoggz the Muff. It's a lot easier to wire up a PT mini with 6" patch cables with the in/out reversed.
...all one must do is unscrew the jacks and flip the board. I put some tape on the enclosure, but nothing too tough.
...all one must do is unscrew the jacks and flip the board. I put some tape on the enclosure, but nothing too tough.
Traded my MIM Telecaster for an Ensoniq ESQ-1
Then promptly got a migraine that induced expressive aphasia, so I snapped this photo between naps. I've been exploring the sounds and pushing the synth through the Chunky Cheese, OC-2, Tri-Mod Wah and the MuRF. The internal battery will need to be saved in order to save any programs that I make as well as any sequences I put together. Should be a quick easy fix. This has turned into a fun little music maker in otherwise interesting times (haven't had a migraine since 1997).
Then promptly got a migraine that induced expressive aphasia, so I snapped this photo between naps. I've been exploring the sounds and pushing the synth through the Chunky Cheese, OC-2, Tri-Mod Wah and the MuRF. The internal battery will need to be saved in order to save any programs that I make as well as any sequences I put together. Should be a quick easy fix. This has turned into a fun little music maker in otherwise interesting times (haven't had a migraine since 1997).
Got a MXR BOD on the way and I'm going to order the MXR bass envelope filter soon.
So I've been messing around with laying out my second board, I'm acually making two new boards, one for my guitar player
and and one for me, both the same.
I will be using lexan (already have the material) for the top tier and light bar.
This board will be different from my first board but will have the same overall dimensions, I don't want to go any bigger.
Not sure about the Dynacomp, I have one but I've been eyeballing a Keely 4 knob compressor.
I need to get all the pedals first so I can mess around with the signal path so this layout is just a test to see how everything would fit.
So I've been messing around with laying out my second board, I'm acually making two new boards, one for my guitar player
and and one for me, both the same.
I will be using lexan (already have the material) for the top tier and light bar.
This board will be different from my first board but will have the same overall dimensions, I don't want to go any bigger.
Not sure about the Dynacomp, I have one but I've been eyeballing a Keely 4 knob compressor.
I need to get all the pedals first so I can mess around with the signal path so this layout is just a test to see how everything would fit.
that's...... neat! what program are you using to do that layout?
do you have a pic of the other board you've already completed that you were talking about?
verrrrrry interssssssssssssting.
Big green dual next to the Polish Love? Is that a Keeley Phaser or the Psylocibe (or w/e the HBE phaser's called)?
- Status
