Power supply for Line 6 X2 Xds95

[fathom66]

Since Ive heard that the X2 power supply is off the market...what are some alternative power supplies that I can get for this wireless instrument system?

 

[seamonkey]

Line 6 DC1G

 

[JUSTINKP]

The Line 6 DC1 has terrible reviews, and my friend got one and it broke pretty fast, two of them.

I got this.. Works great with my X2 wireless...
You can't beat the price at $10 either.

If you look at your X2 manual, you'll see this adapter has the same exact specs. Oh, and the polarity is correct too, most importantly. + -

Buy Electro-Harmonix US96DC-200BI 9VDC Guitar Effects Power Supply | Power Supplies | Musician's Friend

 

[DRafalske]

I'm using a one-spot for mine.

 

[skidrawk]

I'm using a One Spot to daisy chain two of these and my Sansamp DI.

 

[rockstarbassist]

I use a 1-Spot for my board and it powers my XDS-Plus unit just fine.
I just had to get a straight-angle adapter made that's like an inch long to fit between the housing and one of the antenna.
Works like a charm.

 

[MNAirHead]

1 spot

 

[Zooberwerx]

Same here...1 Spot. I can't speak for its durability but it was reasonably priced and available at GC.

Riis

 

[JimmyM]

the power requirements for them are not great, and though i use a one spot too, if you're not powering a lot of effects, you could get a cheaper one. just make sure the jack fits and the pos/neg are the same as what the wireless needs.

 

[georgestrings]

According to the manual, it requires a 9v DC, 300mA, tip negative power supply...


- georgestrings

 

[JimmyM]

should really only need 100ma, but probably a good idea to get a supply with more than you need.

 

[JUSTINKP]

According to the manual, it requires a 9v DC, 300mA, tip negative power supply...


- georgestrings

My manual says 100ma 9V DC + to - Power Supply...

 

[georgestrings]

My manual says 100ma 9V DC + to - Power Supply...

My bad - I misread, and thought the thread was about the XDS-PLUS...


- georgestrings