I had a Mesa WA ears ago. With its cab. It was not enough for me, but I think two 112 or one 212 its ok
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
And the PH212 is the same size as the PH410, but the weight is dramatically different: The PH410 weighs 96 lbs, while most of the PH212s out there are mid-70s because they are neo-loaded. However, if not mistaken, the more recent PH212s are not neo and would be considerably heavier than the older ones. Great 212s though.The Mesa PH212 (I have and gig 2 of 'em) are about mid-70lbs. range in weight,
And the PH212 is the same size as the PH410, but the weight is dramatically different: The PH410 weighs 96 lbs, while most of the PH212s out there are mid-70s because they are neo-loaded. However, if not mistaken, the more recent PH212s are not neo and would be considerably heavier than the older ones. Great 212s though.
Hi, I added an 8 ohms 115 GK to my 4 ohms 112 Walkabout. I'm told it is on the manual that it will get warm and shut down the input , so it's not recommended .For the Walkabout, the Scout cabs are really great at warm and fat.
Depending on your volume needs, the 112 is nice for small/medium stuff, the 115 for bigger stuff.
As has been previously mentioned, The Walkabout is not a terribly loud head.
But, it will run happily at 2.67 or 2 ohms, so, you can readily run 4 8ohm cabs if you want to.
Two Scout cabs will suit most people, for most things.
For home use and light gigging, 112 would be plenty.
For medium to large gigs 115 or 2 112's will be plenty, especially with PA support.
Unless you're playing with guys thaty "just want to play really loud"
That was my case. For that I used 112 on top of 115, or, two 115's.
Have you done this 3x12 for extended periods of time ?I've played my Walkabout through a great many different cabs, and by far, my favorite has been the Genz Benz Uber 212. Close 2nd is Aguilar DB 212. In general, the 212 format is great. Adding an 8 ohm 112 on top creates a nice 2.6 ohm 3x12 rig with plenty enough power for most, and great tone at a good loud level.
Do you go below the 4 ohms the head is rated ?Mesa WA + Aguilar GS112s or GS412s = bass tone nirvana!
Thx!Many have done it with success but Mesa does not recommend it. You can buy a replacement 112, 8 Ohm driver for your combo for about 150 from Mesa that will bring the overall load to 4 Ohms and make it easier on the head.
Not sure if it will fit ... but I found a Mesa PH115 cabinet with a blown driver. I ordered a Faital 15FH510. I think it's a perfect match with my WA 112. Both speakers seem to be about the same efficiency, so neither overpowers the other. It makes the room shake, rattle, and roll! Lows galore.
( http://www.usspeaker.com/homepage.htm )
lemme know, am wondering how this one from faital compares with a 15pr400/3015ho.. the specs look like it may be for vented only?Not sure if it will fit ... but I found a Mesa PH115 cabinet with a blown driver. I ordered a Faital 15FH510. I think it's a perfect match with my WA 112. Both speakers seem to be about the same efficiency, so neither overpowers the other. It makes the room shake, rattle, and roll! Lows galore.
( http://www.usspeaker.com/homepage.htm )