Recommendations for a combo amp with good DI out

[Troy Laue]

Specifically looking for a 210 w/ di out, to use for a stage monitor Tilt back preferred. With reasonable tone shaping abilities. Pre/ post switch. Maybe 300- 500 Watts Something no more than 600 dollars if posssible. Thanks!

 

[garp]

There ain't a lot of choices here in the 300-500W range. IF DI out is a primary consideration, why do you feel that the wattage is a concern? In general, the Fender Rumble series covers a lot of these specs. FWIW, I use a pair of older Fender Bassman 150 combos for this kind of stuff: Tilt back, DI out, and enough tone-shaping for my purposes.

 

[Old Garage-Bander]

There ain't a lot of choices here in the 300-500W range. IF DI out is a primary consideration, why do you feel that the wattage is a concern? In general, the Fender Rumble series covers a lot of these specs. FWIW, I use a pair of older Fender Bassman 150 combos for this kind of stuff: Tilt back, DI out, and enough tone-shaping for my purposes.

FYI, Fender Rumble is post ONLY.
Must run and hide now because I get my come-up-ance for saying that if it sounds like a complaint.
IMHO, It's the only thing that would make my Rumble 200 better than it already is, to have a pre-post switch.
And I say that with all due respect to Fender and anyone who may be offended. YMMV

 

[garp]

FYI, Fender Rumble is post ONLY.

Thanks for clarifying.

 

[Troy Laue]

I could probably get away with less than 500 Watts. And probably a 15 or 12 inch cabinet

 

[JKos]

The Ampeg BA-210v2 meets all your requirements except having a pre/post switch for the DI. It is post.

- John

 

[Troy Laue]

The Ampeg BA-210v2 meets all your requirements except having a pre/post switch for the DI. It is post.

- John

I can run a preamp di in front of theseIf I chose to correct?

 

[JKos]

I can run a preamp di in front of theseIf I chose to correct?

Sure.

 

[SJan3]

Specifically looking for a 210 w/ di out, to use for a stage monitor Tilt back preferred. With reasonable tone shaping abilities. Pre/ post switch. Maybe 300- 500 Watts Something no more than 600 dollars if posssible. Thanks!

Gotta go MARKBASS CMD102.
Plenty of power, lightweight and a good DI. Meets all your needs.

 

[10cc]

GK MB 212II. The DI post EQ with the right settings sounds just like a REDDI. One carry, 500 watts and can be had used for under $500

 

[Troy Laue]

These are great choices. Thanks. Im going to check them all out

 

[Jimmy888]

The DI on my GK MB115 work well, has pre/post selection. Only 200w though.

 

[Troy Laue]

The DI on my GK MB115 work well, has pre/post selection. Only 200w though.

Is it sufficient for a stage monitor?

 

[dvs20]

an older GK backline 210 might work for you, they can be had on the cheap, only issue is the DI is HOTTTTT.

 

[Troy Laue]

an older GK backline 210 might work for you, they can be had on the cheap, only issue is the DI is HOTTTTT.

Sounds like my TC electronics BH550