• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Settings for your Gallien Krueger

I have owned a 200MB for many years. And for all that time I have been trying to make it sound right. I love my little combo because it's little - it was the Shuttle before anybody. And when I turn off the internal speaker and use it to drive my Avatar B210 - so nice. But the speaker has always sounded like crap to me.

Recently, a breakthrough. Right now I have all 4 frequency knobs way down:
4.0kHz: 8:00
1.0 kHz: 7:00 (i.e., all the way down)
250 Hz: ditto
60 Hz: 9:00

Because of another thread I read here recently, I now have Master set to high noon, and I tweak Volume for - well, volume.

This is the closest I have come to a really good tone for me. Not sure how loud it would get with the EQ set like this; but I would hope that anyone who is working with 80 watts or so into a single 12 isn't terribly worried about volume.

--Bomb :bassist:
 
I am also super interested in this... I play a few different types of styles and can figure out the heavy stuff pretty easily. What's tricky for me is getting my bright, garagey sounds out of this head with my 2 SWR 12-packs -- it really draws in a lot of low-end but when I add in fuzz and delay it becomes kinda' challenging. Suggestions? I am new to this kind of power for sure.
 
I just got my GK 800 RB and a 400, so I'm not 100% stuck on my settings yet, but on the 800 I have treble at 8:00, hi-mid at 9:30, lo-mid 12:00, bass at 2:00, hi-boost and mid-contour engaged, boost at 3:00, master/300 watt volume fully CCW, input volume for level....

On the 400RB I dial in treble at noon, hi-mid at 1:00, everything else the same, I use both for a metal band, real clanky tone!!
 
GK 1001 RBII

Contour and presence off, 5 string off.

All 4 EQ knobs at 10 o'clock.

Boost at 3 o'clock.

Volume at 10:30.

Woofer hi-cut engaged. Tweeter off.

Woofer master adjusted as needed for volume.

By fdeck's GK EQ curve measurements, this is "close" to flat, except I am cutting the hi-mids also. My cab and playing style add a lot of high mids so I can cut them back down with the amp.
 
Channel 1 on my Fussion 550 for my Alice in chains/Godsmack band;

Gain to 10:30
Contour, Bright and Deep switches off
Treble 10 o'clock
High Mid 12 o'clock
Low Mid 2 o'clock
Bass 10:30

Channel 2 for my Metal band;

Gain to 9:30
Contour, Bright and Deep switches off
Treble 11 o'clock
High Mid 2 o'clock
Low Mid 1 o'clock
Bass 10 o'clock
 
400RB

Treble - 5 o'clock (max)
High Mid - 1 o'clock
Low Mid - 12 o'clock
Bass - 2 o'clock

I play with a passive bass, I do not use any of the filters. I try to run my master high as possible and adjust my gain and boost as needed.