Does this still qualify? Going to replace the bad monkey with a jptr fx double jive (dual gainstage overdrive) and wire it up
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Show me your compact pedalboard setup
- Thread starter garmenteros
- Start date
This is my latest quick’n’dirty board, a Metro 20 downsized from a 24, which I use in my old guy oldies band...
...tuner into Becos comp, then to the Micropog, which I use to split the signal. As we are a trio, I use the octave up(only)to create a phantom second riff guitar during solos, or as a faux 8-string to fatten things up, sometimes even a keyboard-ish sound using a harmony note over the root. The octave goes to the fuzz, then wah, then to the Keely Mod Workstation for a variety of things, which I haven’t used yet; it replaced the three pedals in the forefront, but I may go back to them. Then the Hotone used as a volume control; the octave is always on, and the signal gets blended in to a second amo as needed. If I really need to effect the full signal, I can always turn the POG off. The dry goes to the main bass amp. Run by a Cioks Eventide Powermax with the USB hooked up to my cel phone with the lyrics(always had a problem with those).
...tuner into Becos comp, then to the Micropog, which I use to split the signal. As we are a trio, I use the octave up(only)to create a phantom second riff guitar during solos, or as a faux 8-string to fatten things up, sometimes even a keyboard-ish sound using a harmony note over the root. The octave goes to the fuzz, then wah, then to the Keely Mod Workstation for a variety of things, which I haven’t used yet; it replaced the three pedals in the forefront, but I may go back to them. Then the Hotone used as a volume control; the octave is always on, and the signal gets blended in to a second amo as needed. If I really need to effect the full signal, I can always turn the POG off. The dry goes to the main bass amp. Run by a Cioks Eventide Powermax with the USB hooked up to my cel phone with the lyrics(always had a problem with those).
This is a nice pedal, but the spring reverb on it does not sound as good as the jrad boing, and the shime as become redundant with the synth now.
Recently assembled this board, for creating music—getting my ideas stored/shared, and live looping...very fun pb! The Emerson board (7”x17-3/4” surface) is really nice...high enough to get a few things underneath, too. Barefoot buttons incoming...
Cioks DC7 on a custom cut mounting plate...always Velcro my LED remote controls underneath, so I don’t lose them...
Cioks DC7 on a custom cut mounting plate...always Velcro my LED remote controls underneath, so I don’t lose them...
Last edited:
My pedalboard for this 2020
Cheers from Chile
Cheers from Chile
im actually getting an ms60b in a couple of days in the mail. Is there a specific patch that you like to use the most?
This is all I need to cover 5 decades of Aerosmith tunes:
Schalltechnik Vöng-Filterung (HPF/LPF/Booster/phase inv./D.I)
Schalltechnik GUMA-Drive (B3K clone)
TC Corona mini (Aerosmith's Tom Hamilton Sweet Emotion toneprint settings)
Boss BB-1x
Schalltechnik Vöng-Filterung (HPF/LPF/Booster/phase inv./D.I)
Schalltechnik GUMA-Drive (B3K clone)
TC Corona mini (Aerosmith's Tom Hamilton Sweet Emotion toneprint settings)
Boss BB-1x
I’m going to try and make this work. First time with the FI at a band rehearsal. I haven’t heard it yet but I anticipate good things.
Wired it up last night and did some reorganization on the HXFX. Getting some great stuff, but Saturday’s practice will be the true test.
Wired it up last night and did some reorganization on the HXFX. Getting some great stuff, but Saturday’s practice will be the true test.
Last edited:
But why did you put the vong first? It makes sendse to have it last in line due to the DI out
I'm using this pedal basically as an HPF/LPF, first in the chain to allow the effects to work more properly with the signal filtered. I'm not using the DI of the Vong. I'm going to my amp (Aguilar TH350) and taking from there the DI signal to the board. If a DI signal is needed from the pedalboard I'll send it from the Boss BB-1x through the Line Out (balanced + some sort of cab sim in there).
I once was invited to play a couple of songs in a gig, so I brought the Vong (battery powered) with my bass and went directly from there to the board.
My current. Only prob is I have to be careful not to fat foot the looper whenever I go for boost. LOL.
Get a Topper for the boosts switch
THX. Hadn’t heard of those. Ordered and will give them a shot.
My compact pedalboard:
Pure tone goodness. No more. No less.
Pure tone goodness. No more. No less.
