Show me your compact pedalboard setup

[tidbits]

@bucephylus I'd say it depends on the pedals you're running. I ran a 10000mAh power supply that looks very similar to what you posted for a good while. I used the 300mA port for an always on tube DI (Finally V2), along with about 200mA of other always on pedals (buffer, comp, drive) and I never had issues. Forgot to charge it between practice once and made it through a second practice, for a total about 8+ hours.

I only switched out to a DC7 b/c I'm running multiple power hungry pedals.

 

[Stranger Danger]

Clean clean clean

 

[ChronicPyromaniac]

Clean clean clean

How do you feel about the Cioks Grip? I recently replaced my power supply with a Sol and find this option interesting.

 

[Stranger Danger]

How do you feel about the Cioks Grip? I recently replaced my power supply with a Sol and find this option interesting.

It’s great. Works flawlessly. Technically this one is not supposed to be compatible with the Nano but I just pushed it in hard and it works great. It will go in easier with any other pedal train board.

 

[klattman]

Couple of recent variations

 

[TaylorJ]

Clean clean clean

Beautiful board! I bet it sounds fantastic!!

 

[Chrishi87]

Clean clean clean

Beautiful. I wish I could be simple like that.
What Amp do you use with it?

 

[heavyfunkmachin]

I created a light/small pedalboard as an alternative to the main/big one. For home and to carry it in the bass soft case pocket…

I keep wanting to add something (a compressor, a rat,…) and remind myself that the concept is embracing the limitations.

Hidden under it’s a cheap DI and a FDeck HPF. Tempted to build a spark clone with top jacks (due to OCD) and add a small HPF to reduce the need of a separate FDeck. Spark as a preamp is amazing, luckily very close to my favourite Vt BAs Di settings

Signal is Bass>HPF>pharaoh clone > Mosky preamp >line 6 m9 > spark > DI

All Very affordable second hand and amazing sounding!

 

[Stranger Danger]

Beautiful board! I bet it sounds fantastic!!

Thanks! It really does

 

[Stranger Danger]

Beautiful. I wish I could be simple like that.
What Amp do you use with it?

Just a Rumble 500 combo. Sounds great. I play a lot through FOH and use the rumble just as a stage monitor mostly

 

[Stranger Danger]

Beautiful. I wish I could be simple like that.
What Amp do you use with it?

Just try the simple route. I think having less going on at your feet can make you more creative and more free. And your core tone will always be better. At least that’s been my experience

 

[meisi]

New practice board lineup. Can use it for both guitar and bass.

No DSP, sims or modeling required. Cioks4 USB powered on the bottom.

 

[Rev_Slinky]

View attachment 7140759
New practice board lineup. Can use it for both guitar and bass.

No DSP, sims or modeling required. Cioks4 USB powered on the bottom.

How do you like that Holy Grail? I've been looking for a simple reverb that works well for bass.

 

[meisi]

How do you like that Holy Grail? I've been looking for a simple reverb that works well for bass.

I really like it for a one knob hall reverb. Tbh I don’t really use it for bass but I’ll maybe add a little bit of hall to give it a small room effect wearing headphones. Even as shown above that’s a lot of reverb for bass - for me.

Like many ehx pedals they become something else past 12oclock.

I did find it fun to set it into flerb mode with a haed on off square wave tremolo in front of it with a fuzz octave. You get this whipping wave effect that is synth like.

I bought it like 15yrs ago for an reverb less guitar amp and never felt the need another reverb pedal. It’s a keeper.

 

[BooshBass]

You don't change pedals for 5 years and now here I am back on the pedals lol. Started using my amp's tuner out so I just stuck my tuner on my amp and added a Bloodmoon to get spooky.

 

[phatbass30]

 

[bassbrad]

I created a light/small pedalboard as an alternative to the main/big one. For home and to carry it in the bass soft case pocket…

I keep wanting to add something (a compressor, a rat,…) and remind myself that the concept is embracing the limitations.

Hidden under it’s a cheap DI and a FDeck HPF. Tempted to build a spark clone with top jacks (due to OCD) and add a small HPF to reduce the need of a separate FDeck. Spark as a preamp is amazing, luckily very close to my favourite Vt BAs Di settings

Signal is Bass>HPF>pharaoh clone > Mosky preamp >line 6 m9 > spark > DI

View attachment 7140375

All Very affordable second hand and amazing sounding!

That Mosky preamp looks very interesting are you using it as a pre or a drive? Seems to have lots of options even more than the D250X I use all the time.

 

[heavyfunkmachin]

That Mosky preamp looks very interesting are you using it as a pre or a drive? Seems to have lots of options even more than the D250X I use all the time.

It’s the best cheap pedal I’ve ever bought. and one of the best overall!!

4 clipping options, great tone, flat frequency response and no loss of lows… if this was boutique I would be paying top dollar for it happily.

I’m using it as an OD, with the spark acting as preamp/eq

 

[projectapollo]

Today's compact worship board.

 

[Swizzledoop]

First iteration of a compact ampless board for upright. Excited to move my whole rig with one trip.