Source Audio Sourcerers Society (S.A.S.S.) Pt 2

[rsmith601]

Any updates on the OFD?

We are working on the panel graphics and the manual. Sounds are close to being final. Getting the gated fuzz right took a bit of time. I know from reading this forum that gated fuzzes are very important to get right! Sorry for the delay.

 

[behndy]

annnnny update on the BEF2?

i can buy? WANTS. I HAZ.

 

[itswac]

We have had some recent discussion on the BEF2 but no time line yet. As always, SASS will be among the very first to know!

 

[itswac]

Well, that's the thing really - I have my distortion and fuzz so I can use them as distortion and fuzz. I want the MWBD for synthier sounds, I'm just having trouble getting them.

Do you have some song/sound examples you can send over that are along the lines of what you are looking for?

 

[Klausklaerwerk]

i just tried to connect my hot hand to my 3 leaf audio wonderlove, somehow it doesn't work, did anyone else try this?
the wonderloves manual says you need an expressionpedal with Moog pinout (voltage on ring), what exactly does that mean? can i get this by adjusting the small switches on the bottom of the hot hand receiver?
also, i just need to use a standard stereo 1/4" patch cable, right?

 

[Smallequestrian]

i just tried to connect my hot hand to my 3 leaf audio wonderlove, somehow it doesn't work, did anyone else try this?
the wonderloves manual says you need an expressionpedal with Moog pinout (voltage on ring), what exactly does that mean? can i get this by adjusting the small switches on the bottom of the hot hand receiver?
also, i just need to use a standard stereo 1/4" patch cable, right?

You shouldn't have to change any of the defaults to use it with the Wonderlove. Yes, a standard 1/4" TRS cable should do the trick. Also, keep in mind, that if you are going to use the expression out on the HH3, you need to power the HH3 with the external power supply. Even if its also being powered by a Source Audio pedal.

 

[itswac]

You shouldn't have to change any of the defaults to use it with the Wonderlove. Yes, a standard 1/4" TRS cable should do the trick. Also, keep in mind, that if you are going to use the expression out on the HH3, you need to power the HH3 with the external power supply. Even if its also being powered by a Source Audio pedal.

All of these suggestions are spot on...if you are having any further trouble after trying this out, send us an email at [email protected]

 

[Klausklaerwerk]

hm i am using a 1/4" cable and the power supply is also connected.
i will just send an email..

 

[behndy]

yah. think i'm going to pick up a BEF Non Pro as a holdover until the 2 is out. 's pretty cheap and i'll be able to flip it. i'd WAY rather have 2 save spots, but i need the space right nows.

 

[rsmith601]

Hey SASS folks. We are looking for an experienced Hot Hand 3 and BEF Pro person in the LA area for a one-off project. Please send me a PM. Must be on the ball!

 

[Gadgetjunky]

Hey SASS folks. We are looking for an experienced Hot Hand 3 and BEF Pro person in the LA area for a one-off project. Please send me a PM. Must be on the ball!

Oh man, not Tulsa.....bummer

 

[The Mouse]

:-(

 

[behndy]

**** **** **** ****.

um. i think i did something stupid. my hot hand's at practice so it's a pain to test till i get out there tonight, but does the Bass Envelove Filter NON Pro version have a mix setting? someway to make it all effect, no clean? i'm rewiring my board and just noticed i don't see a mix knob.

durp?

 

[Skrogh]

**** **** **** ****.

um. i think i did something stupid. my hot hand's at practice so it's a pain to test till i get out there tonight, but does the Bass Envelove Filter NON Pro version have a mix setting? someway to make it all effect, no clean? i'm rewiring my board and just noticed i don't see a mix knob.

durp?

Nope you all ways get the full effect of "lo-retain" as far as I know. This is perhaps the biggest drawback of the non pro BEF...

Well... and the lack of an expression input, but that can be fixed...

 

[behndy]

naw, i don't care about an expression pedal. only thing i want to use it for is full effect with a Hot Hand. no clean signal, just what's processed by the BEF. that's not possible?

 

[itswac]

naw, i don't care about an expression pedal. only thing i want to use it for is full effect with a Hot Hand. no clean signal, just what's processed by the BEF. that's not possible?

No the mix is set on the BEF standard unfortunately.

 

[tink9975]

So I just picked up an Orbital Modulator, and the manual says too look for the SB2 Orbital Modulator Preset Suggestions PDF to find the pre-set settings, but I cant find the PDF on the site, is this still in development?

 

[itswac]

So I just picked up an Orbital Modulator, and the manual says too look for the SB2 Orbital Modulator Preset Suggestions PDF to find the pre-set settings, but I cant find the PDF on the site, is this still in development?

Yes we are still developing that document. We will let you know once it is posted.

 

[stephenmeadbass]

Hi guys I hope im posting in the right place... if not I'm sorry (new here) I ordered a Bass envelope filter but received a Guitar envelope filter... is there any difference? because the specs on your site say they are the same... is it worth me sending it back for a swap or shall i just crack on with the one i have? I'm in the UK so would be a slight hassle

Thanks

Steve

(sorry again if in the wrong section)

 

[kurotenshi]

I never tried the guitar one but from what I know of SA gear the bass is at least tuned to work with bass.
If the store made a mistake they should have to correct it with no costs to you.