• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Spector Tonepump = Boost/Cut!

Feb 21, 2008
797
3
New York City
Disclosures
Endorsing Artist: Spector, Aguilar
I was told in another thread that the Tonepump circuit is actually boost/cut, not boost only as advertised. I contact PJ @ Spector about this and he gave me the following specs:

"Basic gain +12dB

Controls:
Bass: +14dB/-4dB @55Hz
Treble: +14dB/-12dB @6.5kHz

this info will be live on our new site in the Tech Section very soon!"

Meaning that to run the tonepump flat, you have to open the bass pot just shy of 1/4 of the way, and the treble just shy of 1/2 way.

As a side note, the new Spector website looks way better than the old one.
 
"Basic gain +12dB

Controls:
Bass: +14dB/-4dB @55Hz
Treble: +14dB/-12dB @6.5kHz

this info will be live on our new site in the Tech Section very soon!"

Meaning that to run the tonepump flat, you have to open the bass pot just shy of 1/4 of the way, and the treble just shy of 1/2 way.
This is supposedly the new accurate info on the Tone Pump relayed from someone who knew the manufacturer. Apparently Spector never had the proper info on this pre originally.
 
AFAIK they`ve always been boost only. Maybe there`s a newer version that boost and cut.

No.

Same guy. He started a thread here the same day:
http://www.talkbass.com/forum/showthread.php?t=670840

The impression PJ left me with is that they've always been boost/cut (albeit, not much cut on the bass side), but have been mis-advertised as boost-only.
Yes and No. They were advertised as "flat" being both knobs as "boosted slightly". But this new, supposedly accurate info from the horse's mouth blows that whole scenario also.