I noticed a lot of discussion about string spacing at the bridge.
Tech note here; Fender bridges are not rocket science.
If you have an older one, with the threaded design all you have to do
to change spacing is find the thread that gives you what you want.
The newer ones, with dedicated notches require a little work, but no bux.
If you don't like the spacing, remove the saddles, unscrew the height adjusters,
reinsert them from the other side, reinstall and you now have blank saddles.
Mark where you want the strings to be with a sharpie and cut notches with a file.
Instant custom string spacing for no money.
You are welcome.
Tech note here; Fender bridges are not rocket science.
If you have an older one, with the threaded design all you have to do
to change spacing is find the thread that gives you what you want.
The newer ones, with dedicated notches require a little work, but no bux.
If you don't like the spacing, remove the saddles, unscrew the height adjusters,
reinsert them from the other side, reinstall and you now have blank saddles.
Mark where you want the strings to be with a sharpie and cut notches with a file.
Instant custom string spacing for no money.
You are welcome.