• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Stacking two 2x10 cabs vertically

I do two SVT 210av's vert stacked fairly often. Nobody does any stage diving on my gigs, and if they did I wouldn't use it, but it's pretty stable and has yet to fall over on me.
 
No problems here:

JazzSibs02.jpg


:D
 
  • Like
Reactions: DEMS854
Thanks for all the positive responses. My main objective is to get the speaker high enough so I can hear myself. But I don't need to stack two 4x10 boxes - too much speaker (and too much weight).

Just need to find another Eden 2x10 and I can do the experiment on a limited budget....
 
You can put your cab up on a chair and/or tilt it back some. Anyone who says you'll lose lows hasn't compared from out in the room. You get less bass relative to everything else on stage because you're hearing everything else better.

Summarising a post of Bill Fitzmaurice (missing ya big man)
2ft off floor, midrange 140hz (boom) takes a hit, this can be a good thing on a boomy stage.
3.5ft off floor 80hz drops away.
 
I owned the TC Electronic TS 210 for a while. It really is the only cab I would not recommend vertical stacking for. The cabs are very light, have rounded corners, and end up being a wee top heavy due to the tweeter built into the top/left driver. Further, it has no feet really and is covered in the duraliner stuff that will easily slide on tile or non carpet surfaces; especially if the floor wasn't perfectly level.
Cab sounded great but there were numerous wobbles that made me nervous to the point that I just sold them off.
I've vertically stacked 2 GK 2x12s and 2 Avatar 2x10s and loved the results.