SVT-4 PRO compatible with cab setup question

[sdmauney]

I'm thinking of buying an SVT-4 PRO. I currently have two bass cabinets modeled after the TL606 design that each hold one Eminence Kappalite 3015LF Neo 15" Driver.

I use a BOSS ODB-3 Bass Overdrive Pedal and a BOSS OC-3 Super Octave Pedal a lot to get a really dirty low sound. I'm hoping the SVT-4 PRO will provide a lot buffer so clipping is not an issue.

Will my cabinet setup be able to handle the SVT-4 PRO?

Thanks!

 

[JimmyM]

I would think so. Just don't over-preamp it and back off if it sounds like your cabs can't take it.

 

[TheMutt]

I'd say that they should. As long as you're not trying to push everything that you can through them, and they're not farting out you should be fine.

 

[sdmauney]

As far as connecting amp to cabs, would 'dual mono' as shown in the SVT4PRO manual be the proper set up?

 

[RickenBoogie]

Dual-mono is probably your best bet. You don't want the maximum power pushing those 2 cabs into oblivion. But, you still want to be careful not to kill the speakers, use your ears.