• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Double Bass Tailpiece Pulling From Bass

The end pin on my bass is pulling from the bass block towards the top. The bass is a mid 20th century German plywood bass and is 5/8ths scale. Does this need repair? Should I be concerned?

image-1159115963.png
 
Hi Eriksd,

To my eye, from the picture- it seems like the end pin assembly is coming out of the bass.

I would be concerned, but don't panic.

The good news is that as long as there is no damage to the block that the end pin goes into, it should be a pretty simple fix- but I would still recommend taking it to a qualified bass luthier. They will likely slack the strings down and remove the end pin assembly to check for damage to either the block or the assembly itself. It is important to have someone experienced do this, as it is possible that the sound post could drop while the string tension is gone.

There is a possibility that the luthier may find issues that need addressing once inside the bass- but again, don't panic.

You will most likely get quite a few opinions on this- please consider all of the advise you get from folks here.

Good luck with resolving your problem!

Joe

PS- Please fill out your profile, it will help the people of the TB community to better assist you!