• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

The Sushi Box FX Secret Society

Well I just bought the Dr Wattson X in the classifieds.

I know the amp it’s based off of, but I’ve been unable, in the 22 seconds I spent searching, to find out what type of tone stack it uses. So can anyone enlighten on that?

Near the bottom of that ad I included a link that you might find helpful (if it's the same Dr. Wattson ad). Give me a minute and I'll post it here.
 
Here's the link: what’s the consensus on hiwatt/hiwatt style amplifiers??

Edit: Per description at sushiboxfx.com:
The Dr. Wattson is based on the preamp of the legendary early 70s version Hiwatt Dr103.

I ran through that thread and never found a real description of the Hiwatt dr-103 tone stack. I am going to make a real SWAG... Fender RCA style but no or very low set HPF. why ? because that is essentially what Marshall did with amps of the day except he used a rather high hpf as he was marketing to guitarists. Worth what any other Swag is aka my .02, hopefully worth more ;-)
 
The Helix does a pretty good job of emulating the tube thing, but having actual tubes in the signal path could be even better….

I can say that front ending a GK Mb-200 with a Partical Accellerator is very convincing ... I ran the PAX into an Empress Bass Compressor into the Gk at rehearsal yesterday day. Single 15 black widow in a compact slot port cab. Man! I got some great sounds out of that.
 
  • Like
Reactions: Ryan L.
Anyone having a noisy, kind of whining, slampegg x when plugged in a onespot CS6 with a HWUA (turret limited edition)? It is silent when I plug it with another PSU.

Not those, but with other Sushi pedals I've had that. I had to put a buffered pedal in between them to kill the whine.
 
I ran through that thread and never found a real description of the Hiwatt dr-103 tone stack. I am going to make a real SWAG... Fender RCA style but no or very low set HPF. why ? because that is essentially what Marshall did with amps of the day except he used a rather high hpf as he was marketing to guitarists. Worth what any other Swag is aka my .02, hopefully worth more ;-)

Yep.

Here's another thread which is also interesting but doesn't clearly point to a definitive Hiwatt dr-103 tone stack description. Page 3 of this thread indicates it "is sort of a highly tweaked FMV (Fender/Marshall/Vox) style eq."

Who knows? Your educated guess may be spot on!
 
Last edited:
Well I just bought the Dr Wattson X in the classifieds.

I know the amp it’s based off of, but I’ve been unable, in the 22 seconds I spent searching, to find out what type of tone stack it uses. So can anyone enlighten on that?
Hiwatt kind of has its own topography of tonestack. It's similar-ish to the Fender/Marshall/Vox stack, but it's different enough that you can't really put it in the same category. I can pull up the schematic when I get home if that would help.
 
On an unrelated note, can anyone recommend some good IRs to use with bass? It looks like the ones that come stock with the module I use in Gondwana are all variations of the Marshall 1960a 4x12 and don't sound great on bass. I'm more than okay spending a few bucks on IRs, just want to know what some good ones are.
 
Hiwatt kind of has its own topography of tonestack. It's similar-ish to the Fender/Marshall/Vox stack, but it's different enough that you can't really put it in the same category. I can pull up the schematic when I get home if that would help.
It’s no biggie…if it’s somewhat similar to a Fender type tone stack I’ve got an idea where to start with it. Thanks!
 
  • Like
Reactions: Sushi Box FX
Anyone having a noisy, kind of whining, slampegg x when plugged in a onespot CS6 with a HWUA (turret limited edition)? It is silent when I plug it with another PSU.

Not those, but with other Sushi pedals I've had that. I had to put a buffered pedal in between them to kill the whine.


I was just testing out some power supplies with my PAX and UA because I wanted to see what could power my 3 Sushi pedals together. I am getting a finally for the Jan build, so when I put the PAX and UA one right after the other, I was getting what sounded like radio frequency whines.

Then I put a Hyper Luminal between them and it was all good. lol, I returned a couple of power supplies and was about to return the Strymon Oija I have.