• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

The Ultimate Trace Elliot Info Thread (9/18)

View attachment 3142388

With 1/4” to XLR...13.8 and with a standard 1/4 to 1/4 I’m getting 7.7. The XLR is pin 2 hot and pin 1 ground and nothing on pin 3. I’m using left XLR into cab or top 1/4”


I think your getting a bad/false reading on the XLR but the reading on the 1/4 looks good.

You have an 8 ohm cab.
A 4 ohm cab would read around 3 ohms IIRC.
 
I think your getting a bad/false reading on the XLR but the reading on the 1/4 looks good.

You have an 8 ohm cab.
A 4 ohm cab would read around 3 ohms IIRC.
Thanks for your help. 8 ohms seems to be what most of the Red Stipe line I found online. I’m not positive about the inputs on the cab or pin configuration on XLR, but just assumed mine would be the same as other 1518’s. Please correct me if I’m wrong.
 
SMX series came as
Preamp only
250w with all the EQ but minus the stereo.
600w stereo twin 300w power amps.
A rare stupid powerful 2ohm per siide version.
I think that was all put out under Kaman originally but not sure.
Later versions came with 300w and 500w power stages.
 
Overview of model lines, etc...

Series 6

SMX

Peavey era UK made

Peavey era US made

"Elf" - Most recent (as of 2018) lineup of the Peavey era. Elf 200w head, Transit A and Transit B preamp pedals (acoustic and bass oriented, respectively), 1x10 and 2x8 bass cabs. Light, portable, modern. Class D MICRO head (~2 lbs), neo (confirmation?) cabs. Most popular Trace line in a long time (despite the awesomeness of earlier Peavey era gear).

Hexa Valve

Quatra Valve

Twin Valve
 
Hexa Valve

Quatra Valve

Twin Valve

Came here to say we’re lacking in V-Type stuff!

V-Type Preamp
V-Type 300H?? (V-Tupe pre/mosfet output)
V4 MK1 - 220W 4/8 Ohm - tolex & fur versions
V6 - 300W
V4 MK2 - updated pre with tube compressor & drive channel — same as V8
V4 MK2 combos - 4x8 & other variations
V8 - 400W 2/4 Ohm

V-Type cabs - green fur:
1x15
4x12 - 800W

Not a totally comprehensive list but what I’m familiar with...
 
Came here to say we’re lacking in V-Type stuff!

V-Type Preamp
V-Type 300H?? (V-Tupe pre/mosfet output)
V4 MK1 - 220W 4/8 Ohm - tolex & fur versions
V6 - 300W
V4 MK2 - updated pre with tube compressor & drive channel — same as V8
V4 MK2 combos - 4x8 & other variations
V8 - 400W 2/4 Ohm

V-Type cabs - green fur:
1x15
4x12 - 800W

Not a totally comprehensive list but what I’m familiar with...

Let us also not forget the PPA600 & PPA1200.
 
4052H "Bight Box" 4 x 5, rated at 200 watts into 8 ohms

AH500X Solid State GP11 MK V dual mono head - true stereo continuous (not peak) 2 x 250 watts into 4 ohms -- or -- "bridge mode" full range mono 500 watts into 4 ohms -- or -- mono-biamp with 2 250 watt into 4 ohms outputs (high pass crossover at 250Hz for channel A, independent volume controls for each channel)
11 band graphic eq with volume control and pre- post- direct output
Direct Out
2 input jacks (1 active, 1 passive)
2 sets of standard 1/4” speaker outputs
2 3-prong speaker outputs
Independent output controls (in stereo)
Mid-scoop switch
Footswitch jack
Eq defeat switch
Effects loop
Signal out and line out
Pre out
Noise reduction switch
Selectable 2 speed fan
Ultraviolet switch
Dimensions: 52 x 42 x 18 [cm].
Weight: 26 [kg].

1528 2x15 "red stripe" cab rated at 300 watts into 8 ohms, 77lbs
 
In '98-90 i owned a 350W head on a 4x10" and a 1x15" cab playing a lend, very marvelous Pedulla MVP on; the bass i liked pretty much but not the Trace: it had a kinda cold & bitta unhappy tone response to me and i've been glad to get a 100W/4x10" AMPEG for. Sorry yo' Trace guys for mho and brothers in arm although, peace! ;-)

We lack badly on a 50 Cent smiley ... *_*
 
In '98-90 i owned a 350W head on a 4x10" and a 1x15" cab playing a lend, very marvelous Pedulla MVP on; the bass i liked pretty much but not the Trace: it had a kinda cold & bitta unhappy tone response to me and i've been glad to get a 100W/4x10" AMPEG for. Sorry yo' Trace guys for mho and brothers in arm although, peace! ;-)

We lack badly on a 50 Cent smiley ... *_*
Hey

I hope you don’t take this the wrong way, but I’m genuinely curious as I’ve been a member of Talkbass for many years and see posts of the same nature in other threads.

I gotta ask (and again I am really just asking bc I’m curious), if you don’t currently or recently own Trace gear, and don’t like Trace gear, why stop at a post about cataloging information about Trace gear and let everyone in the thread know 1), You don’t use it, 2), You don’t like it, and 3), that you use some other manufacturers stuff (then tell us about your non-Trace Elliot gear?)

I definitely appreciate your last statement about us having more in common as bassists than merely choice of gear, but in all of the years of seeing posts of a similar tone in other threads I have to ask someone, “What’s the real point of adding to a thread if you’re not in anyway contributing contextually relevant content to the thread?”
 
Sorry all. I got busy with life and haven't had a chance to update this yet. But I want to get to that in the next few days now that my schedule is a little more open (sort of).

This info is strangely really hard to find online and I'd love to have a really good repository of knowledge here, crowdsourced to people who know way more than I do since I just started getting into Trace about 6 or 7 years ago.
 
I seem to remember there being a Dutch Trace Elliot forum, that with the aid of google translate, could be mined for some useful info, and a few old catalogues.

Between that, and Basschat, British Audio Service's user manual archive, and the Team Trace threads here, there is a wealth of information - but coalescing it all into an easily digestible format, for the ultimate historical archive, is going to be a major undertaking.

To quote Ash, from the movie Alien :

"You have my sympathy."