• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

thunderbird bass

DO NOT, I repeat, DO NOT re-route a new strap hole somewhere else on your bass. Okay, granted it's an Epiphone and we're not talking about a super expensive high end Gibson, but the point is you do not need to drill holes in your bass to counteract neck dive. All you need to do is replace the top screw of the neckplate (the upper one closest to you) with a slightly longer screw of the same gauge. Screw a washer and nut on the screw and lock the screw in place so that the screw/screw head is roughly 1/4" out from being flush with the body/necklplate and use the top of the screw as either a strap button itself, or put a strap button on the longer screw.

Instant strap peg, works like a charm on my Epi T-Bird.
 
Hi.

Welcome to TalkBass.

I did this:

Epistraplock.jpg


Thre's quite a lot of threads about the subject, so a search will reveal more ideas and opinions ;).

And install strap-locks when You're at it.

Regards
Sam
 
Ditto what Oren said. A leather or suede strap will grip your shirt better and hold the neck up. I'm guessing you're using a nylon strap? Those aren't the best choices for top heavy basses like a Thunderbird. A leather strap solved that problem for me.
 
Been moving strap buttons since 1972 on T-Birds.
That and a wide strap.

The Epi's are nothing compared to the 60's ones BEFORE the button is moved. Those had monster, heavy tuners on them.

63BirdRepairedHead.jpg


The cure for the was the same:

63TBMandevilleBackFX1b.jpg