• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Thunderbird Club

I have a bunch of these shims that I don’t want. I’ll send them to you if you want a few.

I have a different method for raising the pickup, I use the Fender foam in the deeper pocket, both neck and bridge, then thin “spring foams” on each side/edges of the pockets at the neck and thick “spring foams” on each side/edges at the bridge. Then some taller cone springs at the screws.

The spring foams are literally foams with two springs in them.

I’ll send pics in a few days, (like 1000 pages from now!) got a busy couple days ahead and a gig tomorrow night.
Thanks!
 
Let me know when you need some more Gibson pickups, happy to send them across the pond!
I think you'll just have to fly to Seattle for the next GTG and hear things my way :D
I may ask you to buy another one, since I'm about to start the build of a Brooks EB-TB. I'll let my customer decide.
Do they have these pickups with nickel casing too?
 
Some here may not know. Rob is the author of the Gibson Bass Book as well as a bass builder extraordinaire. Ping him for info on how to get a copy. Highly recommended.
View attachment 5210980

Thanks for that info - didn't know such a tome existed so I have just ordered one!

Yeah but still you chose the wrong one to be the EY
So the difference can’t be all that big.

Personally I think the Gibson has a little bit more punch. And a bit more top end.
Which comes across better in the fingerstyle part that I played.
The EY sounds a liitle more “airy”. Less compressed.

My customer chose the Gibson after some deliberation. So I’m going to have that wired to the pots.

Listening to these two clips the particular difference that gave me a reason for a preference was the clarity of the double stop in the picked section in clip A, it sounds much clearer and more articulate to my ears. Overall the A clip I found clearer with a tighter bottom end (ooer missus!) tho I still liked the B clip. In a band situation I may think differently, when all the other lot are making a racket!
 
I may ask you to buy another one, since I'm about to start the build of a Brooks EB-TB. I'll let my customer decide.
Do they have these pickups with nickel casing too?

Just chrome finish on the pickups.
 
Okay. I enjoyed waiting on your verdict.
I'll post the sound clips here again so you don't have to scroll back

Recording A: https://www.brooksbassguitars.com/uploads/1/3/3/7/13376708/test_ey_vs_gibson_-_a.mp3


and


Recording B: https://www.brooksbassguitars.com/uploads/1/3/3/7/13376708/test_ey_vs_gibson_-_b.mp3


Recording A = Gibson
Recording B = EY

So Mark, your top 10 is upside down?

And @GBassNorth you may want to re-write your advice about using EY on a TBird II?


They are obviously very close to each other, since you guys have a hard time deciding which is which.


:cool::bassist::thumbsup:
See? I told you I can't hear for :poop:.:(
 
From another thread:
1b9a72ba92091cc170ea43263244019cf2108fb3114da0bab359fb0adb9ccd0e_1-jpg.5211308
 
I am waiting for a response on an address and when he is available. Looks like the upper strap button was moved and left a missing chunk of finish. I'll use that to offer less and then go buy some white CA and do my normal sand, polish, and buff...assuming the electronics work and the neck is straight.
Seller ever reply?