• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Thunderbird Club

Can the Traynor run 2Ohms?
Interesting. The manual says, "As long as the total speaker load is not lower than 2-ohms, Speaker Load settings of 4- ohms or 8-ohms are interchangeable. Choose the setting that sounds best to you."

And then:

Power @ min. impedance (Watts): 200 @ 4/8 ohms switchable
Minimum Impedance (Ohms): 2
 
Can the Traynor run 2Ohms?

The short answer is yes, the longer answer is I would email them and ask them just to be sure.

12. Speaker Impedance Switch and Speaker Output Jacks
Extension speaker cabinets are connected using the Speaker ¼-inch output jacks. Connections to these jacks are in parallel. Using the Speaker Load switch, the output of the YBA200 can be optimized to provide the rated full power (200 watts) for selected loads (8ohms or 4-ohms).

Note: As long as the total speaker load is not lower than 2-ohms, Speaker Load settings of 4ohms or 8-ohms are interchangeable. Choose the setting that sounds best to you.
 
Should start a thread "What is the best volume for apartment dwelling"?.

“Man, if the neighbors don’t like it, you should fire them and get new ones”

It seems most amps lately only go to 4. I was surprised to find the Strategy can run 2ohms

Both my current Mesa amps do 2ohms. They’re good that way
 
Interesting. The manual says, "As long as the total speaker load is not lower than 2-ohms, Speaker Load settings of 4- ohms or 8-ohms are interchangeable. Choose the setting that sounds best to you."

And then:

Power @ min. impedance (Watts): 200 @ 4/8 ohms switchable
Minimum Impedance (Ohms): 2
The short answer is yes, the longer answer is I would email them and ask them just to be sure.

12. Speaker Impedance Switch and Speaker Output Jacks
Extension speaker cabinets are connected using the Speaker ¼-inch output jacks. Connections to these jacks are in parallel. Using the Speaker Load switch, the output of the YBA200 can be optimized to provide the rated full power (200 watts) for selected loads (8ohms or 4-ohms).

Note: As long as the total speaker load is not lower than 2-ohms, Speaker Load settings of 4ohms or 8-ohms are interchangeable. Choose the setting that sounds best to you.
.... :confused:o_O

I can't even understand that Canukistani dialect!
 
“Man, if the neighbors don’t like it, you should fire them and get new ones”



Both my current Mesa amps do 2ohms. They’re good that way

The neighbors know not to knock on my door.

image.jpeg
 
A question for Canadian Bird brethren. There's an earworm I cannot get rid of. It pops up and wriggles around occasionally then has a sleep, then comes back... it is The Wreck of the Edmund Fitzgerald.

Do I need shooting?

Aye Carumba! I hate that song.

Gordon Lightfoot's whiny nasal singing. The wreck of a mundane great lakes freight shipping vessel. Not historical in any way other than being a big boat that sank killing a crew of 29.

True Canadiana - a celebration of the mundane.
 
It seems most amps lately only go to 4. I was surprised to find the Strategy can run 2ohms

With valve amps it depends on the output tranformer. Solid state amps tend to get bad diarrhea with 'difficult loads'. Being able to drive a 2Ω load without the majick smoke appearing is a sign of a well engineered SS power amp.
 
A cure for cancer will be a thing of the past and ol' Buffy and Gordon will still be kicking ass and that other guy who makes me want to slash my television set with my goalie stick when watching a hockey game. You know that guy.

Hey, everyone always wonders what Don Cherry will say next; including Don Cherry.