/ Register

Tobias neck help

Discussion in 'Basses [BG]' started by GOX42, Jul 22, 2009.

  1. Jul 22, 2009 #1
    GOX42

    GOX42

    Sep 28, 2000
    rising sun indiana
    afew years ago I picked up a tobias neck from a store, it was hanging on the wall. It hadn't had holes drilled for attaching it to the body yet and it has a serial # of 5871 and says made in the usa. any info would help.
     

    Attached Files:

  2. Jul 22, 2009 #2
    SLaPiNFuNK

    SLaPiNFuNK Inactive Commercial User

    Jul 28, 2006
    LA California
    The Brains: FretNation.com
    looks like its from or would have been for a "Killer B"
     
  3. Jul 22, 2009 #3
    mikezimmerman

    mikezimmerman Supporting Member

    Apr 29, 2001
    Omaha, Nebraska
    Just to be sure, is the truss rod ajustment at the heel or on the headstock? The imported Toby basses had the truss rod adjusment at the headstock, while the US-made Killer B's and Growlers had the truss rod adjustment at the heel. The heel also extended past the end of the fretboard, and I can't see from the picture if yours does or not.

    Mike
     
  4. Jul 22, 2009 #4
    GOX42

    GOX42

    Sep 28, 2000
    rising sun indiana
    THanks guys.
    Mike that would be it Thanks for thew info guys. by the by I got it for 75$
    good deal?
     
  5. Jul 23, 2009 #5
    mikezimmerman

    mikezimmerman Supporting Member

    Apr 29, 2001
    Omaha, Nebraska
    Sounds pretty good to me. Of course, it probably doesn't fit on anything so it'll take a custom body, but what's life without a few challenges? ;)

    Mike