O.K. if tone chambers improve the tone of a bass and lighten the body, why not just rout the heck out of the back, and put a light cover over it, but doing it in such a way that the body still maintains rigidity and ability hold the neck soundly. Do the benefits taper off after a point, or start resonating and feeding back like a more conventional hollow body? Or maybe fill the cavity with a very light material? Thanks!
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Tone chambers
- Thread starter brewster
- Start date
I'm no expert, but I wouldn't say that chambering *improves* tone as much as *changes* it. Beyond that, it certainly adds more labor to a build, and very likely could cause the balance to suffer(lighter body+typically heavy-ish bass neck=neckdive). I have a sweet fretted 6 that's chambered; the high end gets just a bit more middy & full where the low D & below are a tad muddier than most solidbodies.
Chip Todd does back routings on Peavey T-series guitars.
He likes the reduced weight and added sustain, but it might not be for everyone. Usually, he goes un-capped, but sometimes caps it with some sort of choice wood.
It's a deep process, you mess up a little, and there it goes....
He likes the reduced weight and added sustain, but it might not be for everyone. Usually, he goes un-capped, but sometimes caps it with some sort of choice wood.
It's a deep process, you mess up a little, and there it goes....
If you just had a plastic cover over the back, the resonance wouldn't be the same. Ditto for if you were to fill it.
They would work for lightening the bass tho.
They would work for lightening the bass tho.
