• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Trace Elf combos 1x8 vs 1x10

basss

Supporting Member
Aug 27, 2001
3,543
1,306
NY
Has anyone compared these? The 1x10 is bigger and seems like it would sound fuller but the 1x8 has that excellent faital driver. The slightly smaller size and weight of the 1x8 is appealing as well.
 
  • Like
Reactions: rapidfirerob
but the 1x8 has that excellent faital driver.
Does it though? As you said, there isn't much info, and the mention of FaitalPro drivers is (unless I've missed it) only made in relation to the 2x8 cabinet, which (again if I remember correctly) comes with two 8PR200-16 woofers.
Noe, the fact the driver in the 1x8 combo has, alone, an 8-ohm impedance
(per the manual, p. 7 - "Power Output (1% THD): 130W - 8 Ω - Internal 8 ohm speaker")
guarantees it is a different one: it may be the 8PR200-8, it may not.
 
I would defer to anyone who has actually tried both.
Failing that, I crunched some numbers and compared woofer area: approximately 50 square inches vs 78. That seems to me like a significant (as in 1 1/2x) edge for the 1x10 for not that much more money or weight.
That would probably inform my decision if I were planning to attempt to use the amp for rehearsals & gigs.
 
  • Like
Reactions: rapidfirerob
I would defer to anyone who has actually tried both.
Failing that, I crunched some numbers and compared woofer area: approximately 50 square inches vs 78. That seems to me like a significant (as in 1 1/2x) edge for the 1x10 for not that much more money or weight.
That would probably inform my decision if I were planning to attempt to use the amp for rehearsals & gigs.
That's a very reasonable way to look at the choice IMO since it seems likely that the speaker quality and the cab voicing engineering/design approach would be similar...I assume it's all done by the same designer/design team. If this were a choice between cabs from different companies their designer engineers might make very different trade decisions based on what they look for in a driver and how their company voices their cabs.