I know I can build one, but does anyone know of a cheap outboard volume control that could be used to turn down a floor wedge? We only have two monitor sends from our board, so the singer/guitarist and drummer share a send, and the drummer wants less volume than the guitarist. Volume controls used to be pretty much standard, but I've noticed that most wedges now seem to forego them.
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Volume control for floor monitor
- Thread starter Misty Mountain
- Start date
JazznFunk
Supporting Member
Just do what I did and buy a powered speaker (12" or 15" - JBL/Behringer, etc) and take a send from the board with the mix you like. Then you have volume, bass and treble at your disposal for your wedge. I take mine on every gig, just in case.
Our drummer just purchased the two floor wedges, so a powered speaker isn't in the cards right now.
Wow. A drummer wanting less volume? Usually people have problems with getting the drummer's monitors loud enough.
I used to share a mon channel with my guitarist/singer. He needed it so loud that it sheared my face off. I put my monitor further away and faced it in a different direction. I think you only have a few choices. Upgrade the console and add an amp, get a powered wedge or place the drummer's monitor somewhere further away from him. Or get the guitarist/singer an IEM.
I used to share a mon channel with my guitarist/singer. He needed it so loud that it sheared my face off. I put my monitor further away and faced it in a different direction. I think you only have a few choices. Upgrade the console and add an amp, get a powered wedge or place the drummer's monitor somewhere further away from him. Or get the guitarist/singer an IEM.
I'd love to get another board, but with the very recent purchase of a bass, a new pre, and another power amp, I'm tapped out on gear purchases at the moment. Given the size of most places we play, placing the monitor further away is unlikely. I's love to go IEM, but the bands' finances are not there, and I'm not buying them for the other members! Yes, I know that a drummer wanting less volume is unusual, but my drummer actually understands dynamics and nuance, and is mostly wanting lead vocals in his wedge. I guess I'll just have to put an outboard potentiometer before his wedge to give him some control.
As mentioned earlier have the drummer aim his wedge away from his ears. Either that or have the "hey look at me" guitar player buy his own powered monitor. The reason monitors don't have volume controls is because modern mixers have more monitor sends than they use to.
If the connections are 1/4", you can get a power soak and put it in line with the monitor you want to have at a lower volume.
L-Pads will burn out soon enough. A power soak is more expensive than a used peavey CS-800 power amp or similar. If the drummer ants his monitor quieter, or the singer/guitarist wants to hear himself louder, one of those two will need to spend a $100-150 to buy a used amp to solve the issue.
Not really. If they are OK with the same mix you can send the same signal to two power amps.
The earlier poster may be right about L-pads burning out. They are generally built for home stereo applications where the power amps are usually a lot smaller.
I've seen used power soaks in pawn shops for $50.
We've been running an L-pad wired inline with the singer's moniter for almost 2 years and it's still going strong. I pulled it out of a big set of 80's model radio shack speakers. We play what i would call "average volume" on stage for a typical rock bar band. Ungodly loud if you like jazz... pretty quiet if you're a metal head.
This is the route I'll take. Those two monitors are not run at very high volumes, only 250W of power to begin with, so I bet a L-pad with 1/4" in/out will work fine. And if it fails during a gig, he can just unplug it and do without the volume control.
Awesome idea on the 1/4" in and out. That would be a 5 second repair during a show if it failed.
Yeah, I'll just mount one in a little box that has enough room for the 1/4" in/out, attach a little velcro to the box, and stick it to his carpet covered monitor. All in about $30.
100 watt L pads are often used in monitors. I see old PV monitors every week that still have working L pads. Some go back to the late 70's and 80's.
