Vox Wyman Replacement Pickguard

[TheLung]

Hi all,

Longtime listener, first time caller, so to speak. I’m new to posting in the TalkBass forum but have learned a lot from reading the site over the years.

I recently purchased a Vox Wyman bass that is missing the pickguard. I am hoping to have a replacement fabricated. To do so, I need a tracing of the part to generate a CAD file. I have scoured the internet with no luck. Any chance someone on the forum might be able to produce one or point me in the right direction?

If I am able to get a replacement made, I would be happy to share the file I used to do so or put folks in touch with the manufacturer. I assume there must be others in a similar situation.

Thanks in advance,
Andrew

 

[nixdad]

I suggest you check with Tony at Pickguardian:Home | Pickguardian

Good Luck!

 

[TheLung]

Many thanks! I just sent him a note. I will report back.

 

[Thornton Davis]

You might want to contact Jim Rhodes. He's a longtime vintage VOX dealer who's retiring and clearing out his inventory. He has lots of vintage Vox parts available.

I think his store is Rhodes Music located on the East coast.

TD.

 

[TheLung]

Thanks for the suggestion. Jim confirmed he doesn’t have parts for the Wyman. His site is a great resource for other Vox components though.

 

[OptionD]

Hi all,

Longtime listener, first time caller, so to speak. I’m new to posting in the TalkBass forum but have learned a lot from reading the site over the years.

I recently purchased a Vox Wyman bass that is missing the pickguard. I am hoping to have a replacement fabricated. To do so, I need a tracing of the part to generate a CAD file. I have scoured the internet with no luck. Any chance someone on the forum might be able to produce one or point me in the right direction?

If I am able to get a replacement made, I would be happy to share the file I used to do so or put folks in touch with the manufacturer. I assume there must be others in a similar situation.

Thanks in advance,
Andrew

 

[OptionD]

Don't know if you ever found a replacement... I ordered this one in December for my daughter's 67 Constellation IV. Can dig up info, if still needed.

I love VOX stuff. Obviously. Own a 67 Hawk as well.

Having experience bending plastic... heated it up upon arrival to contour... . Worked great

 

[Michedelic]

There’s also this company…

Phantom Guitarworks :Phantom |Teardrop |Mando |Vintage reproductions of the original Jennings Musicial Instruments U.K.Guitars from the 1960's