• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Ways to lock up an amp head?

If your amp has a removable power cord, search for an Osha iec connector lock
Screenshot_20220718-191138_Samsung Internet.jpg
 
Tell the other guy your gear is off limits. If he want his buddies in, they can bring their own gear. Shouldn’t be hard.
This. If you can’t trust the guy to respect your wishes and your gear, you’re in the wrong band.
 
There are lots of good ideas here. I would hope that you could trust the drummer in your band to say its not available for other players, but then you have the risk of them bringing in a crappy head to run through your cabinet, ( 8x10 SVT, I assume). That equipment is too expensive to loan out even when its stationary.
The other option is to allow the other bass player to store his own amp in your practice space, which may not be practical.
 
  • Like
Reactions: DJ Bebop
Hey everyone!

If I’m posting in the wrong area let me know!

I wanted to ask if anyone knew any tricks on how to keep my Ampeg SVT classic locked up without having to purchase an amp safe. I rent space with my band and have my bass head there, and my drummer likes to bring random people into the spot to jam. Maybe I’m being petty but it’s an expensive head that I’ve finally gotten the chance to own and I don’t want it getting damaged. Might have to just buy a road case for it..

Let me know if there’s any tips to make it so only I can power it up!

Instead of the expense of an amp case, I'd just buy a footlocker and a padlock.
 
Road case. Lock it.

The plan B is get a cheap amp to leave at the space.

My concern is that you can be perceived as a bit of a jerk by locking people out, although it is not their equipment to touch.

You can get pretty good heads, up to 1000 watts, for little money, take your head home, and use it for home practice and gigging.

This would save wear and tear, and potentially abuse of your cherished head.

By the way, congrats! That is a sweet piece of equipment.
 
I think the best way to prevent someone from picking it up is to put a handle on it. Cause once you try to pick it up you'll never want to again.

I used to own an Ampeg VL502, which was a pretty cool amp... but so freaking heavy. However one of the interesting things about it was that you could lock the power connection with a key.

This isn't my amp, but a pic of one I found on the internet, which looks like it's seen better days.

Screen Shot 2022-07-18 at 8.59.14 PM.png
 
Back when I had a 400 PS, the bigger, heavier, more powerful Fender amp from way back when, I used to always take it with me because I was always using it. Not just the head, but 2 2x15 Bassman cabinets too. No pickup truck, no SUV. I had a 1973 Buick LeSabre. I could fit one cabinet and the head in the trunk and I could fit the other cabinet in the back seat if I took the bottom seat cushion out. Ya, it was a lot of work, but it didn’t kill me.
 
I really like the idea of removing/hiding the fuse. But it seems that just asking the drummer to not let anyone play your rig should be enough.
It should be, and even though they're easy enough to replace, taking the AC cable should provide an extra hint. If your bandmate isn't willing to protect your equipment, he's not your friend.
 
So, OP, I take it your concern isn't that someone would steal your amp, but rather that some randos invited by your drummer would play through it. A reasonable concern, I figure; seems like a good number of amps have been blown by players who don't mind damaging other people's gear.

Putting something through the holes on the power plug's blades might be possible, but those holes are pretty small.


Added: Two great suggestions, above. I wasn't aware of such things. Get a plug lockout!
 
Last edited:

Latest posts