• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

What amp under $1000 dollars goes GRRRR?

Get yourself a GK amp 700rb 800rb 1000rb depending on your budget. You can also get their backline amps which are even more cost effective. There are tons of threads on the forum about them. You can dial in all the growl you want with any of their amps. There are tons of good deals on cabinets. Find ones you like, and go for it.
 
My feelings on this are save a little more coin and get something with enough power that you will never have to worry about power issues. For example, Ampeg svt-2 pro 300w all tube is a monster that will pretty much in all situations be more power than you will ever need. Pairing it with a cab for budget is easy. Start with a 4x10. Then you can add or change cabs down the road example 2x4x10 or 8x10. Also as hard as it may seem don't be hasty in your purchase. I have in the past had the proverbial burning money in the pocket feeling buying gear. Take your time and do your homework. If at all possible play the gear before you buy it. Check for used gear, a great way to get top of the line and budget prices.
Cheers!
:bassist:

ps. Think tube. You wont regret it.
 
Drop $1000 on me and I can set up a NICE rig, right now.

Of course, it'd all be used gear... But here's a fine example: Until recently, I had an Aguilar GS212. Plug my old GK400RB into that and it sounded FREAKIN GREAT. Big rock & roll sound, no doubt. I sold the cab for what - $400... The head can be had for $200.

Want more?

Get an old SWR 4x10 instead for the same OR LESS.
Want more head? GK800Rbs are out there for fairly cheap. SWR 400's / SWR 350s...

The trick here is to buy gear that is NOT the flavor-of-the-month. There's a ton of used, gig-proven gear out there that is GREAT but folks sell because they see an ad and want the latest / greatest.

$1000 is a freakin' fortune for used gear buyer.
 
GRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
 
NOTE TO USA
Gear in Australia is very expensive. You think he's considering paying an extra 350 to ship to Aus
because he can't get what he likes in Aus?
Nope, it's because the Aus distribution chain is composed of robbers after thieves.
If you can get 10% off MAP you're doing well. And the MAP is way higher from the getgo.
 
in oz and we buy in us dollars, it is actually cheaper for us that you guys in the USA at the minute our dollar is better that the USA dollar.
Which is why I have sold alot locally and brought online.
A great way to upgrade
Fusion550,oz $2000-1700
USA I just brought one new delivered $1000
Cabs will cost more for delivery but do your homework and it may still be cheaper
 
If you're buying a head and cabs (i.e. bulky gear), try using one of those re-delivery services (like MyUS.com, but there are plenty of them) to get the best deal from CONUS only retailers and reasonable international shipping rates. Lots of places will ship to Aus/NZ now, but the rates are prohibitive, and you tend not to get the best available prices.