What cab or cabs are you using with your Ampeg SVT-7Pro?

[Da Funky Fish]

I have been investigating amps for a few months. I am familiar with Ampeg and have yet to play the SVT-7Pro but once I try it I think I will know it will be my new head for the wattage/price/weight. I think GC in Brooklyn and Manhattan both have these but prob not any of the cabs I am interested in.

I am wondering what cabs people are using with the SVT-7Pro, what you think of your rig and what you think may be the outcome with the cabs I am interested in. I am thinking light weight/neo stuff. I will be playing mostly with a Fender American Standard P (C# Tuning) and Fender American Standard P Deluxe (E tuning) and louodest gig is against two guitarists/hard rock, both with half stacks.

SVT-7Pro with:

8 Ohm Cabs w/ room for a 210/410 after if desired...
Ampeg Pro Neo 410 850w @ 8 ohm
SWR golight 410 800w @ 8 ohm
GK Neo 410 800w @ 8 ohm

4 Ohm Cabs
Carvin BRX10.4 1200w@4 ohm
SWR golight 410 800w @ 4 ohm
Markbass 104hf/hr 800w @ 4 ohm

High Priced....
Genz Benz GB410 Uber 1000w @ 4 ohm
Aguilar SL410 1200w @ 4 ohm

Any feedback or cab suggestions would be great since GC does not carry most (if any) of these cabs besides GK and Markbass.

 

[KsPiNeSh]

I use a Genz Bez NEOX 212T and Uber 410 - great job of having an expansive, but not uncontrolled and flabby, low end with a cutting midrange and shiny highs if you want them.

 

[rodl2005]

Using my 7 pro with Berg AE212 & 410 mainly.
Have used it with two Mark Bass HR115's, SVT 810 & NV215 also.
Haven't found one it sounds bad with yet.

 

[pedulla1]

I'm using two GK 210 Neos. Great sound and light! Very versatile tone.

 

[Da Funky Fish]

I think my front runner here would be the Ampeg Pro Neo to keep it in the family, and its light weight. But, then I think, maybe I should get a 4ohm/higher wattage cab since the SVT-7Pro would pump 1000w into it.

 

[frankieg]

Using my 7 pro with two Bill Fitzmaurice Jack 1x12's, Eminence 3012ho loaded. I've never been happier and have been gas-less since!

 

[Da Funky Fish]

Nice

Anyone using this head with just an Ampeg Pro Neo 410?

 

[Nomad5]

Hi there,

I'm using mine with a Glockenklang 410 Quattro (4 ohm) on smaller stages, and a Mesa Diesel 215 (also 4 ohm) on the larger stages.

I think I get a wider tonal pallate with the 410, as the 215 is a bit "midrangey". The 215 just gives me a little more clean headroom if I need it, and looks cooler

As was said earlier, I think this head will be very friendly to most cabs. I'm loving the 7-PRO!

Cheers,

 

[jumbodbassman]

my 7 pro is sitting next to me in the box just delivered an hour ago to my office. Got the pf500, had the cutting out issues when driving it so back to GC and ordered the 7 pro. I will probably start it out with some avatar cabs i have around. - 1 12's 4 and 8 ohm versions, 410 8ohm and 2 of the 1 12 cabs. will let you know what i think.
I will have to try it through a pf15he ?? (whatever the new portalflex cab is called). Most folk love the 500 with that cab and this is the same preamp with more balls. problem is nobody has any in stock to try it out....

 

[rodl2005]

7 pro has a tube in the pre. Does the pf500? Same controls tho. Enjoy the step up!

 

[PBFACTOR]

Fwiw I use an avatar 2x10 and another avatar 2x10 I installed a 3rd woofer in. I point 4 at me (vertical stack) and one for the drummer. Sounds good. They're older avatar's (about 10 years old) , so no real crossovers. Kind of have bass blocker things in them.

 

[Da Funky Fish]

Awesome, thanks for the comments. I may look into Avatar. Their new 4x12 neo is only 72lbs I think I just don't recall the wattage on it and how it'd match up with the Ampeg SVT-7Pro.

 

[Bassoballs]

I gigged mine with an 810 for a few months. The 7-pro is a great sounding amp.

 

[redhed]

I use mine with a 810e but lately I've been loving it through my 115e, so much I've been thinking of getting another 115e. And yes the 7-pro is a awesome amp.

 

[Slackerprince]

I love my 7 Pro and started with the Avatar TB153, but found it to be too clean.
I got a PF-210 cab and really love it with that head. I guess I'm just a sealed cab guy.
Can't imagine how awesome that head would be with an Ampeg 8X10, and I'm curious how the Berg NV series would be.
I'm just a hobby player, so I'm set for now, but probably GAS for another PF cab later.

S

 

[rodl2005]

I played mine with a NV215 & it was wonderful, but I haven't heard that cab sound less than great except when I ran a GB Streamliner thru it.

 

[JimmyM]

7 pro has a tube in the pre. Does the pf500? Same controls tho. Enjoy the step up!

Ya, the PF500 is more or less a 7 Pro preamp without the tube. Don't know if the EQ points line up identically, but they sound pretty similar to me, except the 7 Pro has this wallop to it that's in the PF500 but not quite to the degree of the 7 Pro.

 

[lfbassguy]

I use my 7 pro through a pair of pf115he cabs or my alien alliance 4x10. I really like it through the pf cabs. Always sounds great.

 

[BassBob1]

I run mine through and SVT 410hlf. Sounds great and gets louder than I have ever or will ever need. I know the the 410hlf is 4ohm and 500 watt handling with the 7 pro putting out 1000 watts at 4 ohms but there hasn't been any problems thus far.

 

[lokikallas]

Either a single or a pair of tb153s