• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

What's *your* favorite Peavey amp??

peavey-bandit-112-discontinued-13509.jpeg


I got one of these used, but mint for $225 when I was a teenager. I didn't know anything about amps and I didn't know anyone to show me anything about gear. I took it for granted because I could get any guitar sound I wanted, so I just figured that's what all guitar amps did. I got an old Roland drum machine, so I would program drums and bass lines, then use a delay pedal for 3 seconds worth of rhythm guitar, and I ran everything at the same time through the Bandit so I could play lead. I used two cheap cassette tape recorders (built in mike!) to "multi-track", except the playback and record speed was different, so I had to retune my guitar every time to the playback speed. It was also my first bass guitar amp when I made the switch. I traded it for a low end Ovation acoustic later, but I wish I held on to it.
 
My first real rig was a Mark IV and the 1810 BW. I was feeling a bit nostalgic so I tracked down a Mark III 400b and I pick her up on Thursday. Funny that I came across this thread!
Years ago I was invited to play a country gig but had no amp. They said they had an amp so I agreed to play. The amp turned out to be a Peavey 2x12 guitar combo. Good grief. I actually wound up with a decent sound miked up through the PA. I was playing a '78 Kramer DMZ5000. I miss that old bass!
 
I got a used TNT100 and played that until I got a Combo 300. Then I got the powered 2x10/horn top to go with it. No doubt reliable and loud but the tone never made me smile. Then I got an SVT with the 8x10 and sold the Combo 300 and top to a keyboard player and he loved it.
 
I gigged quite extensively for some years with a Peavey TKO 115 with a Scorpion. It was very loud for the bars/clubs I used to play (this was the early 90s). I don't think I was ever over '4' on the volume. If you flatten the graphic EQ, and boost the low and high controls, and turn off the 'Bright' switch, it makes a very usable sound. I put an early SABDDI in front of it, and was happy for a few years more!
It weighs about the same as a small town. I still have it (for no real reason), and occasionally pull it out for practices etc. On an angled amp stand it's plenty loud.
 
  • Like
Reactions: ESPweasel
I have had several Peavey rigs over the years ... still have the Combo 300, but I don't use it much anymore, the best tone I had out of a Peavey head/amp was the "Pro 500"
3762226719_673e0c541e_b.jpg
P1000867 by Invalid Link Removed, on Flickr
3455209245_df402dd6e2_b.jpg
P1000979 by Invalid Link Removed, on Flickr
4329922593_e5eaa71e1f_b.jpg
P1010420 by Invalid Link Removed, on Flickr
4272331670_ff42ef71e5_z.jpg
Combo 300 by Invalid Link Removed, on Flickr
5178965506_46803a0512_b.jpg
P1010189 by Invalid Link Removed, on Flickr
 
  • Like
Reactions: Paul LF and Thundar
I've been jamming out with my Basic 60 in my office a lot, recently. The damn thing has some sort of short with the volume, though. I have to smack it sometimes to get some volume. It could be the pots need cleaning, though. I'll try some contact cleaner and see what happens. It's been sitting in a room that's not climate controlled for years. It gets hot and humid in the summer, and cold and dry in the winter in a very old house 1/4 from the beach and Atlantic Ocean. It doesn't appear to be rusty, though.
 
Ok here's a truly classic Peavey story - bought my first bass amp, a used TNT 150, from the local shop. The salesman was new, and feeling gung-ho, and actually pulled his groin trying to one-arm the beast to the front of the store.
I proceeded to abuse that amp, as only a first bass amp can be, for many moons, boosting the bass and using the "punch" button to rattle the walls. The amp was stolen and heisted off to Boston in a youthful misunderstanding, and I recovered it before heading down to Texas to do a grassroots tour.
For awhile, I thought the electronics had fried, as it developed a loud honking (no, not "honkey") sound whenever I played an Eb.
Years later, I find it plays fine, and actually understand what the built-in crossover is for. Running that to a 1x12 guitar amp really opens up the sound (and makes better use of the chorus) of that poor, hernia-inducing, stolen, toured, forgotten, and rediscovered combo amp.
 
Ok here's a truly classic Peavey story - bought my first bass amp, a used TNT 150, ...
and actually understand what the built-in crossover is for. Running that to a 1x12 guitar amp really opens up the sound (and makes better use of the chorus) of that poor, hernia-inducing, stolen, toured, forgotten, and rediscovered combo amp.
I bet if you check the manual that what is suggested is to run the highs into the amp and the lows into a subwoofer. That's certainly what the 130 manual suggests...
 
I bet if you check the manual that what is suggested is to run the highs into the amp and the lows into a subwoofer. That's certainly what the 130 manual suggests...
I did download it and think it suggested running highs to a powered 2x10. I don't have a large cab so the TNT cab has to suffice for lows, which although not very deep is certainly a better sound than running it full range.