• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Winter Build Off 2018 - Idle Hands are the Devil's Walnut

Any chance on a soundclip? Love to hear how this bass sounds....

Yes. Actually, I ended up changing the pickup as the Delano did not pick up full volume from the A string. Funny thing, I converted a Precision to a 5 string, and the existing pickup worked great.

I ended up winding a humbucker. I took a few pics of the process.

Flat work, bobbin creation, etc.


Made a new cover, routed the pickup area, and wound the coils. 4500 winds each.


The wax bath.


And installed.


I may start using this humbucker design going forward. It's a bit of a pain - twice as much work, but no hum, and they sound almost as good as the single coil.

Anyway, I'll work on a sound clip.
 
Yes. Actually, I ended up changing the pickup as the Delano did not pick up full volume from the A string. Funny thing, I converted a Precision to a 5 string, and the existing pickup worked great.

I ended up winding a humbucker. I took a few pics of the process.

Flat work, bobbin creation, etc.


Made a new cover, routed the pickup area, and wound the coils. 4500 winds each.


The wax bath.


And installed.


I may start using this humbucker design going forward. It's a bit of a pain - twice as much work, but no hum, and they sound almost as good as the single coil.

Anyway, I'll work on a sound clip.
Wicked awesome! That sucks on the Delano pup:( Never played any of them before but was thinking of putting 1 in my Warwick neck position to give it a cleaner but still round tone. Although I've always favored Nordstrands so was thinking on replacing the MEC's with Nordy's too. But I do like the growl that MEC's impart on it. Ahhh choices..... Takes me forever to pull the trigger too as I have to do years of research, because after I get around to actually installing the pickups(in between recording/playing shows/kids/work/etc)months usually go bye. So if I don't like them, I've got hundreds of dollars of paperweights...lol I'd go nut's as a builder. Might be a little too anal! Hahahahah
Can't wait to hear the sound of this bass man!
 
  • Like
Reactions: mapleglo
Yes. Actually, I ended up changing the pickup as the Delano did not pick up full volume from the A string. Funny thing, I converted a Precision to a 5 string, and the existing pickup worked great.

I ended up winding a humbucker. I took a few pics of the process.

Flat work, bobbin creation, etc.


Made a new cover, routed the pickup area, and wound the coils. 4500 winds each.


The wax bath.


And installed.


I may start using this humbucker design going forward. It's a bit of a pain - twice as much work, but no hum, and they sound almost as good as the single coil.

Anyway, I'll work on a sound clip.

Wowsers, Nexy!

I thought I understood just how wide your abilities were but making your own pickup?? I am so impressed! Very cool. I love this bass.

I know we have done this set of puns but I cannot resist...if the Devil is in the details, you have a spot reserved in Heaven because of your skills and ability to knock out these impressive instruments!