Recent content by Angel LaHash

AMPETRONICS Hearing Aid Company based in Newark On Trent Nottinghamshire England, near the VW Dealer and some Car Sales, with a Turning Screw Oppsite and a Main east Train line behind that, to the Right the Bridge of the OLD A1 that used to pass via Newark~ Wow they Moved Northern Rd...

The Copper Tape is used to make a Induction Coil around a Room with a AMP on the side to boost the signal Current Based. I used to work for the company a Long time ago

There are few different types of DPDT switches (On-On/On-Off) (On-On-On) and (On-Off-On) tho the (On-On-On) and (On-Off-On) are more DP3T| The DPDT (On-On-On) can be used to select 2 Pick ups With the Middle location Being Both Pick ups DPDT (On-On) or (On-Off-On) can be used as a Coil Flip if...

2 SPDT (or Higher) Invalid Link Removed this is working like a Binary Switching Up as 0 and Down as 1 00 Top 01 Hum 10 Both 11 Bottem As for a "Kill Switch" im not sure its needed, turn the Volume down to 0 then its going Direct to ground. Also if you wanted you can get a PUSH PULL Switch on...

Just want to watch this post. More than any thing. P-Pickups (Two small pickups, that are linked in series by default) Neck and Bridge Neck Neck & Bridge Parallel Bridge also wanting Neck then linked up to the Bridge in Series, ie one after the other. 4P5T switch of a Strat. 1) Bridge + 2)...

Few ways might do this. 1) Two Push/Pull knobs, 1/ Series/Parallel 2/Phase one pickup 2) using a 5Way super switches (4P5T) Super switch will let you pick it how you want as each connection . So could have NECK/Parallel/Series/Phase Parallel/Bridge If you use a Push/Pull along with...

looks ok to me Just make sure that Ground on the Volume isnt touching the output to the jack also what size cap is that!

Stealth is dam good person, read a lot of his posts and explains things and with great diagrams. Most of the time i see Stealths Posts i dont Pot (whats the point when he has done all the work) ;)

I think blend with a master volume with a kill switch built in As for the blend, could have a blend pot that when all the way to the right is the P pickup and all the way to the left is Jazz, all other times is a blend pot Blend: Dual Pot Take apart the pot, on the common (inner circle) you...

I did think you had a - Part of a Wave in a Guitar, as GROUND is the Base Line on the other end so + is the only side of the sign wave that comes out. so a Diode should work! <been up most of the night and im not feeling well>

A Blend with a Master Volume The Blend will act like the two Volumes getting a balance how you want it and then volume can drop it down (tho most seem to leave it on 10 there might not have a volume pot, so many use the volume on the AMP)

This is a 11 Positions with one being off. If you had a On/Off/On Toggle with a 2P6T you can have 12 Positions with 1 Resisters only. ill try and recall if there was any other ways like a on/on There is a 2P12T but its a FAT thing and costly Sorry it was very late when i typed that

you can get SMD Caps if you want

lol chicken for going middle of the road I would like to know more about a Treb Bleed for a bass, i made one for a strat

I can't see a problems, basically you want to use one of two pick ups in the neck and one of two in the bridge. I don't see a problems in that, but I've never tried it so would like someone to say OK go for it, as well as I'm 90% sure it be OK, but I have been wrong a few times PS I'm off to...