Recent content by stamos

I own a fender kingman accoustic bass with serial number CSI 1100380, China made. Does anyone know how to recognise the production year/factory the bass was made? When did the production of these basses start? at which countries?

I just purchased a G&L L1000 - SERIAL B000544. According to G&L official site, S/Ns started from B000518 in 1980, meaning this is the 26th bass of the factory. Does anyone know if this particular one, or maybe the first production models where specifically ordered for someone or for some...

Can anyone suggest a good dehumidifier.

Here's a front photo. Apart from the wood used, anyway, does anyone know when the fretless production begun for g&L?

I have an SB2 with maple body and an L2000 with mahog body. I have never heard about fretless L2000 though of that date.

Have a look

I have a fretless L2000 bass, SN B 009066, making it a 1982 model. Personally, I have never seen such an old fretless L2000. Does anybody know ,when the fretless production begun for G&L? Any idea also about the woods used ? Fretboard should be ebony, how about body?

I have a 1982 G&L L2000E with a maple/rosewood neck/fretboard (hog body). The back of the neck seems that has not this special sliding feeling touch and the shining view that a maple neck should have. Part of the neck also seems to have faded from yellow to grey somehow. Does anybody know...

Does this "J TORRES" stamp mean also something particular? Is this a fender employee or an external workshop building necks? Maybe he is constructing only c or d type necks?????

I own a 73 Jazz bass (as per S/N) with neck dated "7 NOV72A" ("J.TORRES" stamped). Feels quite chunky, thick, fat and rounded compared to my pre EB stingray, which makes me believe it should be a "U shape" neck. Does anyone know what neck types 73 jazz basses were built by fender? What is...

I need the 10'' speakers for more tight/prima slap sound and the 15'' speaker cannot give this. I guess both cabs can combine full modern sound at all sound regions. Having searched the site I found below: 4x10 proline cab gives 800W at 4 ohms GORM et115 cab gives 400W at 4 Ohms (cannot find...

Have already checked the ebs site, but cannot find this info there

I found a cheap EBS GORM 115 (head ebs 350, cab 1x15) Does anyone know if I can connect another 4x10 cab on top of it? Do you also know impedance/wattage for 115 and 410 cabs and hd 350 head?

I'll do that 96tbird next week sometime.

Except for bringing higher the G side of the pup, I also tried to move higher the ALMICO poles of the G string. I couldn;t, so I quit. However, is this possible?