210 + 410 problem?

[yakmastermax]

Buy the 4x10" and use just that while you sell the 2x10 and find another matching 4x10"!

 

[Rayjay]

I had a 2x10 + 4x10 setup.

Amp was a 750X, which was technically capable of a 2.66 ohm load. The 4x10 was 4 ohms and the 2x10 was 8 ohms...I was told to think of the 4 ohm 4x10 as 2 x (2x10s) each at 8 ohms, so in essence it was like 3 x 8 ohm 2x10s.

It sounded good but the amp eventually failed. I don't recommend running any amp below 4 ohms, no matter what they recommend.

 

[friendlybass]

I do that exact rig. Here's my secret. The Jr has a 350 watt power handling, so keep your amp below that. I run my swr red face bass 350 or my fender rumble 350 and its stinking loud. The two tweeters is often too much, so I turn one off usually the 210. The rig rocks man can't praise it enough

 

[Thomas Kievit]

Interesting thread. Is it possible to have them connected together and still haeva decent sound, or just go for a 610 instead?

 

[iualum]

Interesting thread. Is it possible to have them connected together and still haeva decent sound, or just go for a 610 instead?

Yes. See post #4.

But the 610 is easier.

 

[Thomas Kievit]

Thanks for pointing that out! I think I would go for a 610 instead

Yes. See post #4.