Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
TalkBass has been independent since 1998. Add your voice. Create a free account to reply to discussions, view embedded media, and browse with fewer display ads. Join freeLog in Want zero display ads or expanded classifieds tools? Compare plans.
I've strung many 5vers E - C with no issues. I didn't change the nut, etc. You'll have to set up the bridge to adjust to the smaller string diameter and probably need to check the intonation. Any truss rod adjustment should be minimal.
As long as the bass is setup for it, it's no big deal. I used a Warwick with an adjustable nut when I did it. There is a chance you may want to have the nut cut a little bit. The lighter gauge strings can handle low action a little better. But I'd replace the nut with an adjustable one instead of cutting the one on it.
I'd also recommend going online and buying single high C strings to match a 4 string set. There are several that do that.
These are done great ideas. Thanks. I am curious about an adjustable nut. Where would I find those. I have a luthier in town that could put it on but I've never seen one.