Aguilar DB 410 Drivers

[DaleyKD]

In an attempt to enjoy a fun DIY cabinet project, I'm doing a bit of research now, and I can't seem to find an answer.

I currently have a MarkBass Little Mark III head, and was wanting to make my own 4x10" cabinet. I was hoping to mimic the Aguilar DB 410 cab.

Can someone tell me which driver that cab uses? If it encroaches on copyrights, I understand. Otherwise, what would someone recommend as a competitive driver?

Thanks!

 

[RickenBoogie]

I'm sure Aguilar has those spkrs spec'd out just for their box- and you won't find them "off the shelf". You could probably ask Aguilar to sell you them though, but it may be less expensive to buy a DB410.

 

[Dave W]

I'm sure Aguilar has those spkrs spec'd out just for their box- and you won't find them "off the shelf". You could probably ask Aguilar to sell you them though, but it may be less expensive to buy a DB410.

This.

 

[DaleyKD]

Ah; that makes sense, then. I'm used to things like Marshall g**tar cabs where it's definitely Celestions, buyable off the shelf.

I'll just keep reading up on the other DIY threads in here to try and find a recommended 10" driver, then. (If you have any quick links, that's also helpful.)

Have a great day, guys.

 

[CL400Peavey]

I'll just keep reading up on the other DIY threads in here to try and find a recommended 10" driver, then. (If you have any quick links, that's also helpful.)

Have a great day, guys.

I would take a gander at the eminence speakers web site. I would also consider building two eight ohm 210's rather than one 410.

 

[DaleyKD]

I would take a gander at the eminence speakers web site. I would also consider building two eight ohm 210's rather than one 410.

Cool. I looked at Eminence briefly before lunch. Also, after talking more with my buddy, we both agreed on building a 210 to start (partially cost, partially the scalability for future).

 

[DaleyKD]

So, if a 210 cab is the way to go, and MarkBass recommends an 8ohm cab (this will allow for a second 210 cab later), that means I need either two 4 ohm or two 16 ohm drivers, right? Eminence's 10" bass drivers only have one 4 ohm driver option (BP102-4). Did I pretty much just narrow down my options to the driver to get?

 

[timolius]

You can buy the drivers right off their site for about the same as eminence. They are made by eminence specifically for aggie.
I just bought a replacement for my db410 cab.

Good luck

 

[DaleyKD]

Wow, Timolius. They sure are proud of those speakers. Thanks for pointing that out.