So, nobody tired!

This microphone seems a good mic to bass for me. This mic has high gan before feedback.
let see:
Type
Condenser (electret bias)
Frequency Response
20 to 20,000 Hz
(measured at 304.8 mm [1 ft] from a spherical sound source, free field conditions)
Polar Pattern
Supercardioid
(as supplied), uniform with frequency, symmetrical about axis. Cartridge for cardioid polar pattern also available.
Dynamic Range
(at 20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load)
125 dB (max SPL minus A-weighted noise)
Signal-to-Noise Ratio
59 dB re 94 dB SPL
Output Impedance
Rated at 150 ohms (actual)
Recommended minimum load impedance: 1 kilohm
Hum Pickup
-7.5 dB equivalent SPL in 1 mOe field (60Hz)
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Phantom Power
48 Vdc +/- 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3.
Case
Microphone: Matte black enamel brass case and stainless steel inner grille
Preamplifier: Matte black enamel finished steel
Dimensions
Microphone: 11.7 mm X 35.6 mm (0.46 in. X 1.40 in.)
Preamplifier: 20 mm X 99 mm (0.79 in. X 3.89 in.)
Net Weight
Microphone: 12 g (0.4 oz) less cable
Preamplifier: 96 g (3.4 oz)