Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Yes. I may have actually used 1cuft. Per driver and assumed that each one would have .85 after bracimg, drivers, etc.
Thanks. So 1.0 gross, .85 assumed net.
Is a 15% reduction in internal area common? That seems higher than I'd expect, though I have no real world experience to base that on.
Is a 15% reduction in internal area common? That seems higher than I'd expect, though I have no real world experience to base that on.
What's the mH value of that inductor? When I had a 4Ω 410 with its 16Ω drivers, I low passed at approx 500Hz with a 2.5mH air core.
I'm guessing that the Eminence 32Ω drivers would require a different value.
I'm guessing that the Eminence 32Ω drivers would require a different value.
Fantastic, just what I needed. And they reduced the price online direct, from $99.99 to $89.99 now.
Trying. I've been working doubles and playing double gig weekends. I'm either way too busy or way too bored and never in between. I'll be demoing them with the svpcl and carvin b2000.
Well, I've had to bottle a few batches of homebrew that were done fermenting too so.......
If you have a good eq, you can cut a little around 1.6k to get a more ampeg sound. Or do a wide small boost around 200Hz and a small narrow boost around 2.5k to sound more berg nv610. These drivers eq very well.
@kringle77, if you still have an svt210av laying around, i'd love to get your impression of that cab loaded with these new speakers!
I don't but, my vertical 4x10 would about the same as running a pair of them.
so the internal space is pretty similar then on your 410 (as two of them of course
)?
looks good to me, not gonna lie, if I could get rid of my 212 quickly enough, I might look into building a 610 or 810
. That's just GAS though, I should give it some time - I'm not even in Canada yet.
Just a heads up that these speakers are not just a drop in replacement for the SVT 210AV cabinet. Rewiring to parallel is necessary.
The Ampeg cabinet uses two 4 ohm drivers wired in series for a nominal 8 ohms. So just dropping in two of the SC10 16 ohms would result in a nominal 32 ohm cabinet.
Me too. I'm thinking 2 sealed 410's are in my future. Along with either a Hartke LH1000 or B1500/B2000. Kringle77, did you put 2 dividers in the 610, to make 3 separate enclosures? Sorry if I missed that.
