Baxandall 3 band EQ

[hosebass]

Greetings!

I am currently working on this EQ circuit for a bass guitar Preamp.
At the bottom of the image it states that the power supply pins are to be decoupled with a 10uf and a .1uf caps.

I'm confused as to what cap goes to what power supply pin ( negative or positive)
Is the 10uf for the positive side and the .1uf is for the negative?

Any insight would be appreciated!

Thank you!

 

[JKos]

The two caps are put in parallel. One set for the positive rail and one set for the negative rail. As close to opamps as reasonably possible. Be sure to orient the 10 uF electrolytic capacitor properly.

 

[bass30et1]

Sorry, I'm newbee in electronics...
Just for my knowledge: Is a baxandall 3 eq simple like that?

 

[hosebass]

The two caps are put in parallel. One set for the positive rail and one set for the negative rail. As close to opamps as reasonably possible. Be sure to orient the 10 uF electrolytic capacitor properly.

Thank you for the prompt response!

Could you possibly tell me the orientation of the electrolytic?

Thank you!

 

[hosebass]

Sorry, I'm newbee in electronics...
Just for my knowledge: Is a baxandall 3 eq simple like that?

I’ll let you know after I build the circuit. Haha

 

[JKos]

Could you possibly tell me the orientation of the electrolytic?

Polarized electrolytic capacitors will have a terminal marked with either negative signs (or a black stripe) or positive/plus signs.

If your caps have negative signs or black stipe:
For the positive rail, the negatives side goes to ground. For the negative rail, the negative side goes to the negative rail.

If your caps have positive signs:
For the positive rail, the positive sign goes to the positive rail. For the negative rail, the positive sign goes to ground.

 

[hosebass]

Polarized electrolytic capacitors will have a terminal marked with either negative signs (or a black stripe) or positive/plus signs.

If your caps have negative signs or black stipe:
For the positive rail, the negatives side goes to ground. For the negative rail, the negative side goes to the negative rail.

If your caps have positive signs:
For the positive rail, the positive sign goes to the positive rail. For the negative rail, the positive sign goes to ground.

Thank you! I appreciate it.