• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Boss GT-1B Patches

This is far better than the boss version but I can’t get it to load, just keeps saying checking if site is secure…. Any ideas gumtown?

Did you know that when using GT-1BFxFloorBoard editor
Fx FloorBoard - Browse /GT-1BFxFloorBoard at SourceForge.net
that you can paste an automatically generated patch text list of the settings parameters.

View attachment 4003718

Fri Oct 2 11:53:00 2020
Boss GT-1B Compact Patch Summary
a listing of active only effects.

Patch name = GK HARMONY

********** Signal Chain **********
Input --> [Foot Vol]-[Pedal/Wah]-[Delay]-[FX-1]-[OD/DS]-[PreAmp]-[N.S.]-[FX-2]-[Reverb]- -> Output

********** Pre Amp ***********
[PREAMP: Type] = GK Bass
[PREAMP: Gain] = 27
[PREAMP: T-Comp] = 0
[PREAMP: Bass] = 52
[PREAMP: Middle] = 48
[PREAMP: Treble] = 49
[PREAMP: Presence] = 0
[PREAMP: Level] = 79
[PREAMP: Bright] = Off
[SPKR A: Guitar Speaker Type] = ORIGINAL
[SPKR A: Bass Speaker Type] = Off

********** Reverb ***********
[REVERB: On/Off] = On
[REVERB: Type] = Plate
[RV: Reverb Time] = 1.9 sec
[RV: Pre Delay] = 0 ms
[RV: Low Cut] = 100Hz
[RV: High Cut] = 4.00k
[RV: Density] = 8
[RV: Effect] = 43
[RV: Direct Mix] = 100
[RV: Spring Sens] = 50
[DD: Delay Time] = 400ms
[DD: Feedback] = 14
[DD: High Cut] = FLAT
[DD: Effect] = 100
[DD: Direct] = 0

********** CTL/EXP Settings ***********
[CTL 1: Function] = Delay sw
[CTL 1: Source Mode] = Toggle
[EXP 1 SW: Function] = Off
[EXP 1 SW: Source Mode] = Moment
[CTL 2: Function] = Off
[CTL 2: Source Mode] = Moment
[CTL 3: Function] = Off
[CTL 3: Source Mode] = Moment
[EXP 1: Mode] = Pedal FX/FV
[EXP 1: Patch Level Min] = 200 %
[EXP 1: Patch Level Max] = 0 %
[EXP 2: Function] = Off
[DOWN: Function] = Number Dec
[DOWN: Source Mode] = Moment
[UP: Function] = Number Inc
[UP: Source Mode] = Moment

********** Master ***********
[Master: Catagory 1] = [Category 1] Punk Rock
[Master: Patch Level] = 90 %
[Master: Low] = -4 dB
[Master: Mid Freq] = 25.0Hz
[Master: Mid Q] = 1
[Master: Mid Gain] = 0 dB
[Master: High] = 0 dB
[Master: BPM/Tempo] = 120
[Master: Master Key] = G (Em)
[Catagory 2] = [Category 2] Studio

********** Noise Suppressor ***********
[NS: On/Off] = On
[NS: Threshold] = 30
[NS: Release] = 0

********** FX1 ***********
[FX1: On/Off] = On
[FX1: Type] = Harmonist
[TW: Mode] = BPF
[TW: Polarity] = Up
[TW: Sens] = 30
[TW: Freq] = 50
[TW: Peak] = 0
[TW: Direct Mix] = 50
[TW: Effect] = 0
[ACS: Type] = BOSS Comp
[ACS: Sustain] = 50
[ACS: Attack] = 50
[ACS: Tone] = 0
[ACS: Effect] = 0
[LM: Type] = Multi
[LM: Attack] = 60
[LM: Thresh] = 11
[LM: Ratio] = 5:1
[LM: Release] = 25
[LM: Effect] = 0
[GEQ: 40Hz] = 0 dB
[GEQ: 100Hz] = 0 dB
[GEQ: 250Hz] = 0 dB
[GEQ: 500Hz] = 0 dB
[GEQ: 1KHz] = 0 dB
[GEQ: 2.5KHz] = 0 dB
[GEQ: 8KHz] = 0 dB
[GEQ: 16KHz] = 0 dB
[GEQ: Level] = 4 dB
[PEQ: Lo Cut Off] = FLAT
[PEQ: Lo Gain] = -6 dB
[PEQ: Lo Mid Freq] = 25.0Hz
[PEQ: Lo Mid Q] = 1
[PEQ: Lo Mid Gain] = 3dB
[PEQ: Hi Mid Freq] = 25.0Hz
[PEQ: Hi Mid Q] = 1
[PEQ: Hi Mid Gain] = 0dB
[PEQ: Hi Gain] = -6dB
[PEQ: Hi Cut Off] = FLAT
[PEQ: Level] = -20dB
[TM: Type] = Fat
[TM: Reson.] = 50
[TM: Low] = 0
[TM: High] = 0
[TM: Effect] = 0
[BS: Type] = S->H
[BS: Low] = -50
[BS: High] = -50
[BS: Effect] = 0
[BS: Body] = 0
[SG: Sens] = 50
[SG: Rise Time] = 50
[SG: Level] = 0
[DF: Tone] = 0
[DF: Sense] = 70
[DF: Attack] = 0
[DF: Depth] = 0
[DF: Resonance] = 0
[DF: Effect] = 0
[DF: Direct] = 0
[SYN: Wave] = SAW
[SYN: Cutoff] = 30
[SYN: Reson.] = 40
[SYN: Sense] = 50
[SYN: Decay] = 50
[SYN: Depth] = 25
[SYN: Level] = 0
[SYN: Direct] = 0
[OC: Octave -1] = 50
[OC: Octave -2] = 50
[OC: Direct Mix] = 0
[PS: Voice] = 1-Voice
[PS: Mode] = Mono
[PS: Pitch] = 12
[PS: Fine] = -50
[PS: Pre Delay] = 0ms
[PS: Effect] = 1
[PS: Mode] = Mono
[PS: Pitch] = 0
[PS: Fine] = -10
[PS: Pre Delay] = 0ms
[PS: Voice 2] = 0
[PS: Feedback] = 100
[PS: Direct] = 0
[HR: Voice] = 1-Voice
[HR: Harmony] = +3rd
[HR: Pre Delay] = 40ms
[HR: Voice] = 44
[HR: Harmony] = +1oct
[HR: Pre Delay] = 0ms
[HR: Voice 2] = 0
[HR: FeedBack] = 0
[HR: Direct] = 53
[PH: Type] = 4stage
[PH: Rate] = 50
[PH: Depth] = 55
[PH: Manual] = 0
[PH: Reson.] = 0
[PH: Step Rate] = Off
[PH: Effect] = 0
[PH: Direct] = 0
[FL: Rate] = 50
[FL: Depth] = 75
[FL: Manual] = 80
[FL: Reson.] = 0
[FL: Separ] = 0
[FL: Low Cut] = 110Hz
[FL: Effect] = 0
[FL: Direct] = 0
[TR: Shape] = 85
[TR: Rate] = 50
[TR: Depth] = 50
[TR: Level] = 0
[RT1: Speed] = Fast
[RT1: Rate (Slow)] = 85
[RT1: Rate (Fast)] = 50
[RT1: Rise Time] = 50
[RT1: Fall Time] = 50
[RT1: Depth] = 50
[RT1: Level] = 0
[UV: Rate] = 50
[UV: Depth] = 100
[UV: Effect] = 0
[VB: Rate] = 45
[VB: Depth] = 1
[VB: Off/On] = On
[VB: Rise Time] = 50
[VB: Level] = 0
[RM: Mode] = Normal
[RM: Freq] = 100
[RM: Effect] = 100
[RM: Direct] = 0
[HU: Mode] = Picking
[HU: Vowel 1] = I
[HU: Vowel 2] = I
[HU: Sense] = 50
[HU: Rate] = 100
[HU: Depth] = 50
[HU: Manual] = 100
[HU: Level] = 0
[SDD: Type] = Mono
[SDD: Delay Time] = 400ms
[SDD: Feedback] = 14
[SDD: High Cut] = FLAT
[SDD: Effect] = 100
[SDD: Direct Mix] = 50
[SDD: Tap Time] = 0%
[ACS: High] = 0
[ACS: Body] = 0
[ACS: Low] = -50
[ACS: Level] = 50
[RT2: Balance] = 50
[RT2: Speed] = Fast
[RT2: Rate (Slow)] = 0
[RT2: Rate (Fast)] = 0
[RT2: Rise Time] = 50
[RT2: Fall Time] = 50
[RT2: Depth] = 50
[RT2: Effect] = 50
[RT2: Direct] = 0
[OVT: DeTune] = 8
[OVT: Tone] = -49
[OVT: Upper] = 1
[OVT: Lower] = 40
[OVT: Direct] = 50
[FB: Depth] = 14
[FB: F.B. Trigger] = On
[CE: Mode] = Mono
[CE: Rate] = 0
[CE: Depth] = 50
[CE: Low Cut] = 100Hz
[CE: Hi Cut] = FLAT
[CE: Effect Level] = 50
[ENH: Sense] = 0
[ENH: Low] = 0
[ENH: High] = 0
[ENH: Low Freq] = 31.5Hz
[ENH: High Freq] = 800Hz

********** FX2 ***********
[EFFECTS: On/Off] = On
[EFFECTS: Type] = Compressor
 
The up, down, ctl, pedal and pedal switch (when you press it hard) can all be assigned different effects so it's like having five stomp boxes. It does mean you can't use up/down to toggle through the patches but can do this with the left dial. There are only two FX banks so there is a limit to what you can assign to each of the above stomp switches.
You can use the pedals to move up and down the effects banks by assigning the left and middle pedal as up and right and middle pedal as down. It means you have to step on two pedals at the same time. I’ve replaced my GT-1B with an HX Stomp (got a used one) which is excellent. With the Stomp you can add a small external pedal to move through the patches/banks.