• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Changing my Strings

MaidenVT

MaidenVT

Feb 20, 2022
267
277
USA
#1
Hi,

I want to replace my original strings. My Squier classic vibe 70's bass came setup with Steve Harris .050-.110 Signature 4-string Flatwound Bass Guitar Strings, Nickel/Stainless. I was thinking about trying some other strings but don't want to mess with the setup too much. I don't use a pick so what strings would you guys recommend to replace them with?
 
#4
MaidenVT said:
I want to replace my original strings. My Squier classic vibe 70's bass came setup with Steve Harris .050-.110 Signature 4-string Flatwound Bass Guitar Strings, Nickel/Stainless.
Click to expand...

What exactly are you looking for in terms of tone and feel that's different from the Steve Harris set?

By the way, those flats are monel alloy, which is a nickel-copper alloy.
 
  • Like
Reactions: DBVT
#6
Ricky Rioli said:
Those DRs are 50-70-90-110 whereas the the Rotosound flats are 50-75-95-110.

Also those flats are stiffer and have higher tension than pretty much anything. Their total tension is over 240 lbs, while Rotosounds own 50-70-90-110 roundwounds are under 200 lbs. I think a fresh set up will be necessary whatever you try next?
Click to expand...
Those are some High tension strings.
 
  • Like
Reactions: tindrum, stigbeve and Ricky Rioli
#7
michael_t said:
What exactly are you looking for in terms of tone and feel that's different from the Steve Harris set?

By the way, those flats are monel alloy, which is a nickel-copper alloy.
Click to expand...
IDK I just wanted to try something different. I do like them maybe I'll keep using them on this bass because I have my Warwick with factory strings.
 
#9
I only use flats on my Performer Jazz, but the Chromes sound really nice. A lot punchier than other flats I've played with. If you ever make the jump to rounds, I've found that Elixirs and D'Addario NYXLs are great options. Punchy without being clangy and pretty good tone lifespan.
 
#12
MaidenVT said:
IDK I just wanted to try something different. I do like them maybe I'll keep using them on this bass because I have my Warwick with factory strings.
Click to expand...
Don't do it man !!!
If you like them keep playing them
I have a set of Fender flats that have been on my #1 (and I have had a lot of #1's recently)
Since 2000ish
Get comfy with them and get used to the instrument
Just my 3cents
 
  • Like
Reactions: Iristone and TN WOODMAN
#13
MaidenVT said:
Hi,

I want to replace my original strings. My Squier classic vibe 70's bass came setup with Steve Harris .050-.110 Signature 4-string Flatwound Bass Guitar Strings, Nickel/Stainless. I was thinking about trying some other strings but don't want to mess with the setup too much. I don't use a pick so what strings would you guys recommend to replace them with?
Click to expand...

You are about enter journey in a quest for sound. There are so many choices you could be on this trip for a while. I'm thinking if you continue with the same gauge of strings, at worst you may need a truss rod adjustment. My advice is to try as many as you can afford. Give each set at least about 100 hours of play time before moving on to the next set. Equally important is while you are checking out your new set of strings, at the same timeexplore different tone setting.

Best wishes.
 
  • Like
Reactions: smogg
#14
Chop11777 said:
Don't do it man !!!
If you like them keep playing them
I have a set of Fender flats that have been on my #1 (and I have had a lot of #1's recently)
Since 2000ish
Get comfy with them and get used to the instrument
Just my 3cents
Click to expand...


My thoughts exactly. They should last a long time & get better over time. I know Steve changes his every gig but mere mortals should be able to get better mileage out of them. Great string.
 
#15
MaidenVT said:
Hi,

I want to replace my original strings. My Squier classic vibe 70's bass came setup with Steve Harris .050-.110 Signature 4-string Flatwound Bass Guitar Strings, Nickel/Stainless. I was thinking about trying some other strings but don't want to mess with the setup too much. I don't use a pick so what strings would you guys recommend to replace them with?
Click to expand...
A set of Whatevers should do it.
 
#16
I'd recommend that you move to lighter strings, unless you REALLY love those bridge cables you have on there. Yes, it'll mean a setup but 50 - 110's have a LOT of tension, and over time, your bass's neck is likely to not deal with that well.
 
#19
MaidenVT said:
Hi,

I want to replace my original strings. My Squier classic vibe 70's bass came setup with Steve Harris .050-.110 Signature 4-string Flatwound Bass Guitar Strings, Nickel/Stainless. I was thinking about trying some other strings but don't want to mess with the setup too much. I don't use a pick so what strings would you guys recommend to replace them with?
Click to expand...
Something that resembles .050 - .110 unless you want to mess with the nut.
 
#20
MaidenVT said:
Hi,

I want to replace my original strings. My Squier classic vibe 70's bass came setup with Steve Harris .050-.110 Signature 4-string Flatwound Bass Guitar Strings, Nickel/Stainless. I was thinking about trying some other strings but don't want to mess with the setup too much. I don't use a pick so what strings would you guys recommend to replace them with?
Click to expand...

Just write down current neck relief and action before change string.
Truss rod adjustment on headstock far easier than fender classic neck.
 
  • Like
Reactions: DBVT

Latest posts

Top Bottom
Back