• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Club Alleva-Coppolo (Part 21)

That KBP4 is from the same era as mine... Smaller headstock and Hipshot ultralite tuners. Probably the 1/8 thicker body too.. Mine is so light i wanted to add some mass to the prototype. Mine is July of 2004. Sonic Blue now almost surf green.. with a probably a couple hundred thousand miles of use.

You will know if yours is Nitro if when you get a chip. it just keeps on going.. HA
Mine started with wearing a western Pearl Snap Shirt.. And Im a NYer!

16265580_10210655254271365_1269445506194276501_n.jpg

16298698_10210655254351367_1433811873086237544_n.jpg



View attachment 1117845 Here's a new acquisition I'm excited about! An early KPB4 in Sherwood Green, serial number B0016. The seller was acting on the owner's behalf, and didn't know much about it other than it was in mint condition. I sent Jimmy a few pics to make sure it was legit. Quick question...any non-invasive way to tell if it's nitro or poly? Thanks.
 
That KBP4 is from the same era as mine... Smaller headstock and Hipshot ultralite tuners. Probably the 1/8 thicker body too.. Mine is so light i wanted to add some mass to the prototype. Mine is July of 2004. Sonic Blue now almost surf green.. with a probably a couple hundred thousand miles of use.

You will know if yours is Nitro if when you get a chip. it just keeps on going.. HA
Mine started with wearing a western Pearl Snap Shirt.. And Im a NYer!

View attachment 1117850
View attachment 1117854
This one balances perfectly and feels like it's in the low to mid 8lb range.
 
  • Like
Reactions: svtb15
View attachment 1117845 Here's a new acquisition I'm excited about! An early KPB4 in Sherwood Green, serial number B0016. The seller was acting on the owner's behalf, and didn't know much about it other than it was in mint condition. I sent Jimmy a few pics to make sure it was legit. Quick question...any non-invasive way to tell if it's nitro or poly? Thanks.

I emailed Jimmy with the serial number of my EUT5 & he gave me the deets. This was a while back and EUT's ARE pretty rare by the sounds. ..so. ...ymmv.
Yours is a Lovely looker btw.
 
View attachment 1117845 Here's a new acquisition I'm excited about! An early KPB4 in Sherwood Green, serial number B0016. The seller was acting on the owner's behalf, and didn't know much about it other than it was in mint condition. I sent Jimmy a few pics to make sure it was legit. Quick question...any non-invasive way to tell if it's nitro or poly? Thanks.
If it's nitro lacquer from the Professor and kept in its case when it's not being played, you can tell by the smell. It has a really great old paint smell (smells a bit like some waxes too) that you can identify once you're smelling for. True story. It helps to tell if (on top of keeping it in a case when not being played) you practice in a small, warm room, where the smell can concentrate a bit. Also, sometimes the nitro exhibits a bit more "sucking" into the grain of the wood too. And there is a bit of a feel for it, but that's a lot harder to describe.
 
View attachment 1117845 Here's a new acquisition I'm excited about! An early KPB4 in Sherwood Green, serial number B0016. The seller was acting on the owner's behalf, and didn't know much about it other than it was in mint condition. I sent Jimmy a few pics to make sure it was legit. Quick question...any non-invasive way to tell if it's nitro or poly? Thanks.

I've even noticed a slight 'gasoline' like effect when you put a bass with nitro up to a light.
Almost mother of pearl like in a way.

Also, look for pitting....nitro tends to shape it's way into the grain.
 
I emailed Jimmy with the serial number of my EUT5 & he gave me the deets. This was a while back and EUT's ARE pretty rare by the sounds. ..so. ...ymmv.
Yours is a Lovely looker btw.
I've even noticed a slight 'gasoline' like effect when you put a bass with nitro up to a light.
Almost mother of pearl like in a way.

Also, look for pitting....nitro tends to shape it's way into the grain.
thanks guys, I'll look for these traits. The bass was shipped in its original Alleva gig bag (with pimped out purple interior I might ad), and removed outside, so no paint smell noticed at the time. It does appear as though some finish "settling" has occurred. Either way, it sounds better than my custom shop P! Cheers!
 
thanks guys, I'll look for these traits. The bass was shipped in its original Alleva gig bag (with pimped out purple interior I might ad), and removed outside, so no paint smell noticed at the time. It does appear as though some finish "settling" has occurred. Either way, it sounds better than my custom shop P! Cheers!
Forgot to mention--congrats on the new KBP! I have officially never seen one in Sherwood, and I'm a sucker for a matching headstock, so it's ticking a lot of my boxes! One of about two basses I can still covet is a KBP5...
 
IMG_0325.JPG
Anyone interested in an Alleva-Coppolo onboard preamp? I got this from Samuel a little while back and it sounded fantastic in a bass I no longer own. Now that I'm down to two AC's and two Sad's, not using anymore. Thought I would offer here first before posting in the classifieds. Not sure the value...Thinking around $225?