• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Club Sandberg (part 2)

I’ve read every post and listened to every internet demo I could find. Same story as most US based fans of Sandberg can’t find some to play myself. I am tone hunting for a reggae rock project (think Sublime,Pepper) I do and can’t decided tm4 or vm4. Any help/opinions would be super helpful. Thanks in advance.
Not sure you can go wrong with either of those options, but my vote would be for a TM4.
 
I hear you Jughead. I did explain to the guy at CME that I’ve never touched one like that and asked if I was cool he said yea but I didn’t feel great about it either.
The guys at Pitbull Audio offer 30 days and they usually have a Sandberg or two in stock. I actually bought mine from them. They said they would take it back 100% if I wasn't happy.
 
The guys at Pitbull Audio offer 30 days and they usually have a Sandberg or two in stock. I actually bought mine from them. They said they would take it back 100% if I wasn't happy.

I talked w Ben from Pitbull. Super helpful and owns a Sandberg fiver. But they don’t have one in stock to my liking either way I would have to custom order from Sandberg. Then I would be stuck for sure with it. Kinda wish I could have done the deal with them.
 
  • Like
Reactions: dwellers
Yes, I think it is meant to be. I'll post photos when it arrives.
Sans pickguard...

20200226_154712.jpg
 
Question for you club-sters familiar with the 4-string Sandbergs...

I'm trying to get an idea of how slim feeling or semi-stout these necks are compared with other common basses in our midst. The spec's listed on their website seem to indicate that the 39.5mm width at the zero fret puts these 4-string necks right in that happy middle ground between a more narrow 1 1/2" Jazz neck and a more chunky 1 5/8" P-bass neck.

Then the profile is listed as "c shape", but in my limited experience there's more than one way to carve a "c", right?

I ask because I recently had a very rough go with a neck that was both too narrow and too shallow for me, but I've always had a soft spot for the in-between nut width of 1 9/16" on a 4-string. It doesn't look like there are any of these basses at a shop within a few hundred miles of me, so there's that.

Actually considering the buy-it-to-try-it route, but the German models are NOT cheap!! Any observations or feedback would be a great help, thanks.
 
Question for you club-sters familiar with the 4-string Sandbergs...

I'm trying to get an idea of how slim feeling or semi-stout these necks are compared with other common basses in our midst. The spec's listed on their website seem to indicate that the 39.5mm width at the zero fret puts these 4-string necks right in that happy middle ground between a more narrow 1 1/2" Jazz neck and a more chunky 1 5/8" P-bass neck.

Then the profile is listed as "c shape", but in my limited experience there's more than one way to carve a "c", right?

I ask because I recently had a very rough go with a neck that was both too narrow and too shallow for me, but I've always had a soft spot for the in-between nut width of 1 9/16" on a 4-string. It doesn't look like there are any of these basses at a shop within a few hundred miles of me, so there's that.

Actually considering the buy-it-to-try-it route, but the German models are NOT cheap!! Any observations or feedback would be a great help, thanks.

The radius on my TT is pretty flat.
 
Question for you club-sters familiar with the 4-string Sandbergs...

I'm trying to get an idea of how slim feeling or semi-stout these necks are compared with other common basses in our midst. The spec's listed on their website seem to indicate that the 39.5mm width at the zero fret puts these 4-string necks right in that happy middle ground between a more narrow 1 1/2" Jazz neck and a more chunky 1 5/8" P-bass neck.

Then the profile is listed as "c shape", but in my limited experience there's more than one way to carve a "c", right?

I ask because I recently had a very rough go with a neck that was both too narrow and too shallow for me, but I've always had a soft spot for the in-between nut width of 1 9/16" on a 4-string. It doesn't look like there are any of these basses at a shop within a few hundred miles of me, so there's that.

Actually considering the buy-it-to-try-it route, but the German models are NOT cheap!! Any observations or feedback would be a great help, thanks.

I feel your pain man. Just ordered one and am super nervous I won’t like the neck shape. Fingers crossed.
 
  • Like
Reactions: Jughead6