Eden WT-300 Knob End Caps

[sumeursault]

Does anyone have, or know a source for, early Eden knob end caps? There's an Israeli store on Reverb that sells something that looks very similar. But I think Eden went to a slightly narrower knob profile for later amps, and this looks like one of those. Backstory - just received a wonderfully well-preserved WT-300 ('97 build) from a fellow TBer, and I'm wondering if I can get it 100% refurbished with some replacement knobs and/or end caps. Thanks!

 

[Jeff Scott]

I don't know about what's out there these days but in the late '90s I had a WT400 that I changed out the colored end caps for black ones. Rean had them at the time.

 

[Lava]

You might try lovemyswitches dot com. They carry a lot of different style knobs. Good luck.

 

[sunburst79]

I don't know about what's out there these days but in the late '90s I had a WT400 that I changed out the colored end caps for black ones. Rean had them at the time.

I did some searching for SWR cab corners lately which were REAN. From what I was able to determine they were bought by Neutrik for their jack and connector business and the accessories or cabinet hardware business was shut down. You can buy corners that are visually the same from Penn Elcom but the REAN mold make is gone and the mounting screw pattern is off by a mm or so.

If the knobs were REAN on these then they maybe unavailable. That said REAN like Penn Elcom supplied a lot of manufacturers large and small. It's possible someone picked up the torch so to speak and is offering a suitable substitute. But there's probably enough of these sold that they might be found on eBay or Reverb as good used parts.