TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
To be honest I've just put the tape measure on them and they are 32.25 which is even worse.The info on the package is slightly dated. The current winding length on the GHS "short scale" should be 32.75" from ball end to silk. That's only 0.25" difference, though.
To be honest I've just put the tape measure on them and they are 32.25 which is even worse.
I'm guessing you measured from the inside of the ball; we measure from the OUTSIDE.
Are you stringing these thru-body or top-load? The SWB-1 can do both, if I recall.
I was going to top load them with them being flats. As you can see from the top picture they are well short of the nut. I have some rounds on at the moment that go through the body so I was able to check the length without taking the old strings off.
The packaging looks fine. I did search for a long time for a medium set but had no luck at all in finding any here in Greece. I went with these because like you say they were made in conjunction with Scott. They came from Athens as I live the other side of Greece , 5 hours away. I think I have to put this down to experience. Thanks anyway.
I wanted to just confirm that you got the new packaging (with the purple outer label) and not the older black package.
GreeksIt says "short scale" up top, yet at the bottom it says "long scale plus".![]()
You can always do what Jack Casady did when the Pyramid flats were too short for his Guild bass: trim the silks. From the picture, it doesn't appear that the taper starts until after the the string would go over the nut anyway. (Pyramid later fixed them by making the speaking length a little longer, just like Jon did after talking to Scott.)