• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Headless Club???

Haven’t posted this little gem in a while. 1 of 10/15 ever built . Modulus Flight 6SP
EA8739C9-4285-4540-BA62-6B59A818A2BE.jpeg
 
Nice. I'll keep an eye on the classifieds and Reverb next year when I have the cash as the exchange rate and taxes means $US2800 new is about $A4500 in my hands so S/H could make a big difference to my wallet.
 
Headless 27" scale travel bass is progressing, I doubt you'll see much natural wood in the end...

upload_2021-12-12_19-59-24.jpeg


upload_2021-12-12_19-59-35.jpeg


upload_2021-12-12_19-59-48.jpeg


upload_2021-12-12_20-0-1.jpeg


upload_2021-12-12_20-0-12.jpeg



It has taken 3 years to get it this far and a good bit still to do...

  • Shaping headstock to remove almost everything (truss access will be above headpiece), might leave enough to be hangable
  • Body is currently 3 parts (top, middle back) that still need to be glued together and shaped to uniformity
  • finish control cavity (routed in back/middle, but top needs to be thinned enough for shafts to make it through) and pickup cavity (still a little tight)
  • Determine any/all "comfort" contours once body is glued.
  • Epoxy body with enough dazzle that @JIO will notice me! ;)
Specs so far:
  • Nova Headless System by @Passini
  • Single Nordy Zen Blade (bridge wind)
  • Volume P/P for series/parallel switch
  • No tone control
  • 24 fret 27" neck sourced from Ebay
 
Last edited:
It has taken 3 years to get it this far and a good bit still to do...

  • Shaping headstock to remove almost everything (truss access will be above headpiece), might leave enough to be hangable
  • Body is currently 3 parts (top, middle back) that still need to be glued together and shaped to uniformity
  • finish control cavity (routed in back/middle, but top needs to be thinned enough for shafts to make it through) and pickup cavity (still a little tight)
  • Determine any/all "comfort" contours once body is glued.
  • Epoxy body with enough dazzle that @JIO will notice me! ;)
Specs so far:
  • Nova Headless System by @Passini
  • Single Nordy Zen Blade (bridge wind)
  • Volume P/P for series/parallel switch
  • No tone control
  • 24 fret 27" neck sourced from Ebay

Amazing bass!
 
  • Like
Reactions: MovinTarget