• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

I have a HUGE problem and need help asap!!!

Status
Not open for further replies.
batterycharger.jpg

Damn it!!! I just spent ten hours trying to install a hand generator in MY Stingray and someone already beat me to it.
Looks like another bass goes into the junk pile.
 
Ok, ill make this brief.... I play a fender american Deluxe Precision bass (active) through an SVT3Pro and an ampeg 8x10.... Also a sonic maximizer if it matters... Anyway, im getting this sound from my cab like a speaker is blown... Just for giggles i tried my mexican p-bass (passive) and it sounded fine... Im just wondering what you guys think of that... Im positive nothing is wrong with the american, but i was wondering if the active pickups are too much for the cab to handle??? Or is there a weak speaker in the cab that the active pickups really bring out???? This is something i need to be resolved asap! Please Help guys....

I suppose i shouldve mentioned in my original post that i had actually tried that.... Im really in the dark on how to figure out whats wrong....
:D This is too funny. I told you it was the pickguard screw! ;)

Okay, seriously.
One other thing it could be is your input gain. If it's too high you will be overdriving the preamp section of your amplifier. It will make a distorted sound.

Usually, the active electronics alone is not enough to overdrive your amp. Some amps have a gain setting, usually right next to the input. If you do, it needs to be set so it is not clipping and overdrive your amp. Sometime there is a lamp/light indicating when clipping is occurring. If so all you have to do is turn down your gain so you get a good signal, but not overdriving the amp.

The other thing you mentioned is you use a Maximizer. Depending on where this is in your signal chain it also can add to you input/gain. That may have to be adjusted as well.

Also, the settings on the Maximizer can also be a bit too much for some speakers. I used one at one time, but no longer use it. I found the setting for bass need to be very subtle. If you put up the lo-contour too much it will send too much low frequency to the speaker and distort your sound. Same with the hi-contour. To much and the high frequencies will kind of thin out your sound and your attack will sound clanky. If your cab has a tweeter you also will probably get a lot hissing.


Hope this helps.
If not, try a new 9v battery.
 
...im sorry i have to be the one to tell you this....the reason your bass distorts is because....you have aids....and cancer....

but i heard that scientist are coming dangerously close to a cure to both of the diseases...coincidentally they both involve new 9-volt batteries:hmm:....whoda thunk it ( just thought id get one more batter gag in there before they go down for good)

another reason might be if that your output jack on your bass could be a bit screwed up or somthing along those lines or possibly the cable(forgive me if he said he switched it already i have been reading this thread for so long i forgot what exactly he said) hell idk

and hey i was in the exact same predicament as you i picked up my active 6er a few days ago, on a show day actually, and it was distorting. i could have pulled my hair out...but i dont have hair...sooooo yeeea.....anyway just put all that anger into driving to the nearest gas station at about 130 miles an hour for a 9 volt.
 
I'll give some advice I heard given by a computer salesman once. If you have the box for the bass, put it in it and take it back to the shop and get your money back. You're to thick to play bass.:hiding:

He got sacked. Well, it's been nice contributing to TB. I'll see any of the rest of you if you get chucked into the bass bin.:hmm:
 
Status
Not open for further replies.

Latest posts