• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Jazz Bass (4-string) BEAD problem

Hey everyone!

So I have this Jazz Bass and I really need the low-B and I hate 5-strings, but I face some problems with my low-B.
I use a hybrid GHS Boomers set (065-085-115-135) and the 135-B sounds muddy and muted. No sustain and brightness. The EAD strings are fine!
I tried a DR DDT set (065-125) but the 125 wasnt enough for a low-B.

Halp me!
 
I have used BEAD tuning a lot. Setting the pickup height closer to the B string will usually help, even though it looks odd because the pickups will slant higher from the B and lower towards the G. It helps compensate for the narrow 4 string neck and the height above the frets needed for the B to ring without fretbuzz. It's definitely the cheapest solution to try.
 
I ran my MIJ Fender Jazz 4 fretless for years tuned and strung BEAD before I got my PentaBuzz. Just the bottom dweller in me! Fender has a set with 130's I believe. I used the Taperwounds and had to jack the saddle a little to compensate.
 
I will lay odds on your .135 being a 4 wrap string - putting a 4 wrap string under a 3 wrap string usually results in at least a slight shift in tone (toward the darker) on the thick string.

I am three wraps to .190 fwiw - but I know I am the exception and not the rule.

Skip