• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

JHS Morning Glory Clean

is the clean just a dry blend? or is it a parallel clean boost?
from what I could tell, it's a parallel clean boost - it seemed like it splits off AFTER the gain, but before the rest of the morning glory circuit, run through the "clean" blend control to mix with the dirt, and sent to the level control.

EDIT: there's a lot of details in the JHS video, but it's a lot longer. At one point he's running it as a straight clean boost - max gain, max clean, then controlling the amount of boost with the level.
 
Bassists have been using this already
If it's the same as in the Punchline, I already like it a lot :)

1769745868343.png
 
I have mine on my board, will be using it this weekend. I'm not using it for obvious distortion - it does a good version of that "beefing up" of the sound when a tube amp is "pushed a bit, but not yet broken sounding" very well. I have an Empress compressor before it, and the way I have things set, the two are kinda in the same neighborhood in terms of the sonic result used one at a time. Having both on is fun in the "my bass has really good sustain" kinda vibe.
 
It’s not necessarily obvious but the “clean” is a blend between morning glory v1 (fully CCW) and clean only (CW). The “drive” isn’t a drive level just amount of effect, level is controlled by the clean knob.

Tone only affects the drive.

In any case it is really nice on bass. It provides just a little push and edge that adds some overdrive character but it still sounds like your bass. It has enough level to push whatever you follow it with if you want.

I’m pretty impressed so far as a good transparent OD/boost. It’s more a utility pedal than an effect but utility is important. It really wants to be always on if you set it subtly.